weirdcat/dotfiles
1
1
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

initial commit

Browse Source
This commit is contained in:
Николай
2025-06-03 14:16:01 +03:00
commit 6fed9ef617
683 changed files with 109296 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

132
Thunar/accels.scm Normal file
View File

@@ -0,0 +1,132 @@
; thunar GtkAccelMap rc-file -*- scheme -*-
; this file is an automated accelerator map dump
;
(gtk_accel_path "<Actions>/ThunarActions/uca-action-1739060949375198-2" "<Primary><Shift>x")
(gtk_accel_path "<Actions>/ThunarStandardView/sort-by-type" "<Alt>t")
; (gtk_accel_path "<Actions>/ThunarStatusBar/toggle-last-modified" "")
; (gtk_accel_path "<Actions>/Thunarwindow/menu" "")
; (gtk_accel_path "<Actions>/ThunarBookmarks/9b79b94accb399d6818f26d0ece42f82" "")
; (gtk_accel_path "<Actions>/ThunarActionManager/cut" "<Primary>x")
(gtk_accel_path "<Actions>/ThunarStandardView/sort-by-size" "<Alt>s")
; (gtk_accel_path "<Actions>/ThunarWindow/file-menu" "")
; (gtk_accel_path "<Actions>/ThunarWindow/close-tab" "<Primary>w")
; (gtk_accel_path "<Actions>/ThunarWindow/switch-previous-tab-alt" "<Primary><Shift>ISO_Left_Tab")
; (gtk_accel_path "<Actions>/ThunarStatusBar/toggle-size" "")
(gtk_accel_path "<Actions>/ThunarWindow/new-window" "")
; (gtk_accel_path "<Actions>/ThunarWindow/clear-directory-specific-settings" "")
; (gtk_accel_path "<Actions>/ThunarWindow/close-window" "<Primary>q")
; (gtk_accel_path "<Actions>/ThunarWindow/open-parent" "<Alt>Up")
; (gtk_accel_path "<Actions>/ThunarWindow/view-side-pane-menu" "")
; (gtk_accel_path "<Actions>/ThunarStatusBar/toggle-size-in-bytes" "")
; (gtk_accel_path "<Actions>/ThunarWindow/switch-previous-tab" "<Primary>Page_Up")
; (gtk_accel_path "<Actions>/ThunarActionManager/open" "<Primary>o")
(gtk_accel_path "<Actions>/ThunarStandardView/sort-ascending" "<Alt>a")
; (gtk_accel_path "<Actions>/ThunarWindow/toggle-split-view" "F3")
; (gtk_accel_path "<Actions>/ThunarActionManager/copy-2" "<Primary>Insert")
; (gtk_accel_path "<Actions>/ThunarActionManager/trash-delete" "Delete")
; (gtk_accel_path "<Actions>/ThunarWindow/open-recent" "")
; (gtk_accel_path "<Actions>/ThunarWindow/view-configure-toolbar" "")
; (gtk_accel_path "<Actions>/ThunarStandardView/forward" "<Alt>Right")
; (gtk_accel_path "<Actions>/ThunarActionManager/restore" "")
; (gtk_accel_path "<Actions>/ThunarWindow/open-location-alt" "<Alt>d")
; (gtk_accel_path "<Actions>/ThunarBookmarks/de6513926a18a664f076c25df7ec693d" "")
; (gtk_accel_path "<Actions>/ThunarStandardView/select-by-pattern" "<Primary>s")
; (gtk_accel_path "<Actions>/ThunarWindow/zoom-out-alt" "<Primary>KP_Subtract")
; (gtk_accel_path "<Actions>/ThunarWindow/open-file-menu" "F10")
(gtk_accel_path "<Actions>/ThunarWindow/contents" "")
; (gtk_accel_path "<Actions>/ThunarWindow/show-highlight" "")
(gtk_accel_path "<Actions>/ThunarStandardView/sort-descending" "<Alt>z")
(gtk_accel_path "<Actions>/ThunarStandardView/sort-by-name" "<Alt>n")
; (gtk_accel_path "<Actions>/ThunarStandardView/select-all-files" "<Primary>a")
; (gtk_accel_path "<Actions>/ThunarActionManager/execute" "")
; (gtk_accel_path "<Actions>/ThunarStandardView/properties" "<Alt>Return")
; (gtk_accel_path "<Actions>/ThunarActionManager/cut-2" "")
; (gtk_accel_path "<Actions>/ThunarStandardView/sort-by-dtime" "")
; (gtk_accel_path "<Actions>/ThunarWindow/switch-next-tab" "<Primary>Page_Down")
; (gtk_accel_path "<Actions>/ThunarWindow/open-templates" "")
; (gtk_accel_path "<Actions>/ThunarActionManager/paste-2" "<Shift>Insert")
; (gtk_accel_path "<Actions>/ThunarStatusBar/toggle-filetype" "")
; (gtk_accel_path "<Actions>/ThunarWindow/close-all-windows" "<Primary><Shift>w")
; (gtk_accel_path "<Actions>/ThunarStandardView/create-document" "")
; (gtk_accel_path "<Actions>/ThunarWindow/detach-tab" "")
; (gtk_accel_path "<Actions>/ThunarWindow/cancel-search" "Escape")
; (gtk_accel_path "<Actions>/ThunarWindow/zoom-in-alt2" "<Primary>equal")
; (gtk_accel_path "<Actions>/ThunarStatusBar/toggle-hidden-count" "")
; (gtk_accel_path "<Actions>/ThunarShortcutsPane/sendto-shortcuts" "<Primary>d")
; (gtk_accel_path "<Actions>/ThunarActionManager/undo" "<Primary>z")
; (gtk_accel_path "<Actions>/ThunarStandardView/toggle-sort-order" "")
; (gtk_accel_path "<Actions>/ThunarWindow/view-location-selector-entry" "")
; (gtk_accel_path "<Actions>/ThunarActionManager/paste" "<Primary>v")
; (gtk_accel_path "<Actions>/ThunarWindow/zoom-in-alt1" "<Primary>KP_Add")
; (gtk_accel_path "<Actions>/ThunarWindow/view-menubar" "<Primary>m")
; (gtk_accel_path "<Actions>/ThunarActionManager/restore-show" "")
; (gtk_accel_path "<Actions>/ThunarWindow/open-desktop" "")
; (gtk_accel_path "<Actions>/ThunarWindow/view-as-detailed-list" "<Primary>2")
; (gtk_accel_path "<Actions>/ThunarStandardView/back" "<Alt>Left")
; (gtk_accel_path "<Actions>/ThunarWindow/zoom-out" "<Primary>minus")
; (gtk_accel_path "<Actions>/ThunarStatusBar/toggle-display-name" "")
; (gtk_accel_path "<Actions>/ThunarWindow/sendto-menu" "")
; (gtk_accel_path "<Actions>/ThunarWindow/go-menu" "")
; (gtk_accel_path "<Actions>/ThunarWindow/remove-from-recent" "")
; (gtk_accel_path "<Actions>/ThunarActionManager/open-with-other" "")
; (gtk_accel_path "<Actions>/ThunarStandardView/invert-selection" "<Primary><Shift>i")
; (gtk_accel_path "<Actions>/ThunarWindow/view-side-pane-shortcuts" "<Primary>b")
; (gtk_accel_path "<Actions>/ThunarWindow/reload-alt-2" "Reload")
; (gtk_accel_path "<Actions>/ThunarWindow/view-location-selector-menu" "")
(gtk_accel_path "<Actions>/ThunarActions/uca-action-1724255257300256-1" "F4")
; (gtk_accel_path "<Actions>/ThunarWindow/edit-menu" "")
; (gtk_accel_path "<Actions>/ThunarActionManager/copy" "<Primary>c")
; (gtk_accel_path "<Actions>/ThunarStandardView/unselect-all-files" "Escape")
; (gtk_accel_path "<Actions>/ThunarStandardView/forward-alt" "Forward")
; (gtk_accel_path "<Actions>/ThunarActionManager/move-to-trash" "")
; (gtk_accel_path "<Actions>/ThunarWindow/reload-alt-1" "F5")
; (gtk_accel_path "<Actions>/ThunarActionManager/delete-3" "<Shift>KP_Delete")
; (gtk_accel_path "<Actions>/ThunarStandardView/arrange-items-menu" "")
; (gtk_accel_path "<Actions>/ThunarWindow/reload" "<Primary>r")
; (gtk_accel_path "<Actions>/ThunarWindow/contents/help-menu" "")
; (gtk_accel_path "<Actions>/ThunarWindow/bookmarks-menu" "")
(gtk_accel_path "<Actions>/ThunarStandardView/sort-by-mtime" "<Alt>m")
; (gtk_accel_path "<Actions>/ThunarWindow/open-computer" "")
; (gtk_accel_path "<Actions>/ThunarWindow/toggle-image-preview" "")
; (gtk_accel_path "<Actions>/ThunarWindow/toggle-side-pane" "F9")
; (gtk_accel_path "<Actions>/ThunarWindow/view-as-icons" "<Primary>1")
; (gtk_accel_path "<Actions>/ThunarActionManager/delete-2" "<Shift>Delete")
; (gtk_accel_path "<Actions>/ThunarWindow/zoom-in" "<Primary>plus")
; (gtk_accel_path "<Actions>/ThunarStandardView/rename" "F2")
; (gtk_accel_path "<Actions>/ThunarWindow/open-location" "<Primary>l")
; (gtk_accel_path "<Actions>/ThunarWindow/view-as-compact-list" "<Primary>3")
; (gtk_accel_path "<Actions>/ThunarWindow/view-menu" "")
; (gtk_accel_path "<Actions>/ThunarWindow/search" "<Primary>f")
; (gtk_accel_path "<Actions>/ThunarWindow/new-tab" "<Primary>t")
(gtk_accel_path "<Actions>/ThunarActions/uca-action-1739060572959732-1" "<Primary>n")
; (gtk_accel_path "<Actions>/ThunarWindow/zoom-reset" "<Primary>0")
; (gtk_accel_path "<Actions>/ThunarStandardView/back-alt2" "Back")
; (gtk_accel_path "<Actions>/ThunarActionManager/open-in-new-tab" "<Primary><Shift>p")
; (gtk_accel_path "<Actions>/ThunarWindow/view-location-selector-buttons" "")
; (gtk_accel_path "<Actions>/ThunarActionManager/redo" "<Primary><Shift>z")
; (gtk_accel_path "<Actions>/ThunarWindow/open-trash" "")
; (gtk_accel_path "<Actions>/ThunarActionManager/open-in-new-window" "<Primary><Shift>o")
; (gtk_accel_path "<Actions>/ThunarWindow/view-statusbar" "")
; (gtk_accel_path "<Actions>/ThunarActionManager/open-location" "")
; (gtk_accel_path "<Actions>/ThunarStandardView/duplicate" "")
; (gtk_accel_path "<Actions>/ThunarActionManager/trash-delete-2" "KP_Delete")
; (gtk_accel_path "<Actions>/ThunarStandardView/back-alt1" "BackSpace")
; (gtk_accel_path "<Actions>/ThunarStandardView/create-folder" "<Primary><Shift>n")
(gtk_accel_path "<Actions>/ThunarActions/uca-action-1727273949048539-1" "<Primary><Shift>c")
; (gtk_accel_path "<Actions>/ThunarWindow/open-home" "<Alt>Home")
; (gtk_accel_path "<Actions>/ThunarWindow/switch-focused-split-view-pane" "")
(gtk_accel_path "<Actions>/ThunarWindow/show-hidden" "<Alt>period")
; (gtk_accel_path "<Actions>/ThunarStandardView/set-default-app" "")
; (gtk_accel_path "<Actions>/ThunarWindow/empty-trash" "")
; (gtk_accel_path "<Actions>/ThunarBookmarks/57c4cd1fa6ab4408d7ea1e83d9b5d565" "")
(gtk_accel_path "<Actions>/ThunarWindow/preferences" "<Primary>i")
; (gtk_accel_path "<Actions>/ThunarActionManager/delete" "")
; (gtk_accel_path "<Actions>/ThunarWindow/open-network" "")
; (gtk_accel_path "<Actions>/ThunarWindow/view-side-pane-tree" "<Primary>e")
; (gtk_accel_path "<Actions>/ThunarWindow/open-file-system" "")
; (gtk_accel_path "<Actions>/ThunarWindow/search-alt" "Search")
; (gtk_accel_path "<Actions>/ThunarWindow/switch-next-tab-alt" "<Primary>Tab")
; (gtk_accel_path "<Actions>/ThunarActionManager/sendto-desktop" "")
; (gtk_accel_path "<Actions>/ThunarStandardView/make-link" "")
; (gtk_accel_path "<Actions>/ThunarWindow/zoom-reset-alt" "<Primary>KP_0")
; (gtk_accel_path "<Actions>/ThunarWindow/about" "")

22
Thunar/addtags.sh Executable file
View File

@@ -0,0 +1,22 @@
#!/bin/bash
# Script to tag images using ExifTool
# Check if at least one file is provided
if [ "$#" -eq 0 ]; then
zenity --error --text="No files provided. Please provide at least one file."
exit 1
fi
TAGS=$(zenity --entry --title="Tag Image" --text="Enter tags (comma-separated):")
if [ -n "$TAGS" ]; then
for FILE in "$@"; do
if [ -f "$FILE" ]; then
exiv2 -M "set Iptc.Application2.Keywords $TAGS" "$FILE"
else
zenity --warning --text="File not found: $FILE"
fi
done
else
zenity --warning --text="No tags entered."
fi

22
Thunar/renamerrc Normal file
View File

@@ -0,0 +1,22 @@
[Configuration]
LastActiveMode=THUNAR_RENAMER_MODE_NAME
LastActiveRenamer=ThunarSbrNumberRenamer
[ThunarSbrRemoveRenamer]
StartOffset=18
EndOffset=4
EndOffsetMode=THUNAR_SBR_OFFSET_MODE_RIGHT
StartOffsetMode=THUNAR_SBR_OFFSET_MODE_RIGHT
[ThunarSbrInsertRenamer]
Offset=0
Text=[phonk2]\
Mode=THUNAR_SBR_INSERT_MODE_INSERT
OffsetMode=THUNAR_SBR_OFFSET_MODE_LEFT
[ThunarSbrNumberRenamer]
TextMode=THUNAR_SBR_TEXT_MODE_NT
Text=
Mode=THUNAR_SBR_NUMBER_MODE_123
Start=1

73
Thunar/uca.xml Normal file
View File

@@ -0,0 +1,73 @@
<?xml version="1.0" encoding="UTF-8"?>
<actions>
<action>
<icon>utilities-terminal</icon>
<name>Open Terminal Here</name>
<submenu></submenu>
<unique-id>1724255257300256-1</unique-id>
<command>exo-open --working-directory %f --launch TerminalEmulator</command>
<description>Example for a custom action</description>
<range></range>
<patterns>*</patterns>
<startup-notify/>
<directories/>
</action>
<action>
<icon>vscodium</icon>
<name>Open in VSCodium</name>
<submenu></submenu>
<unique-id>1727273949048539-1</unique-id>
<command>codium .</command>
<description></description>
<range>*</range>
<patterns>*</patterns>
<directories/>
</action>
<action>
<icon>emblem-draft</icon>
<name>Create file</name>
<submenu></submenu>
<unique-id>1739060572959732-1</unique-id>
<command>touch &quot;New document.txt&quot;</command>
<description></description>
<range>*</range>
<patterns>*</patterns>
<directories/>
</action>
<action>
<icon>emblem-plan</icon>
<name>Rewrite from clipboard</name>
<submenu></submenu>
<unique-id>1739060949375198-2</unique-id>
<command>xclip -o &gt; %n &amp;&amp; notify-send &quot;Rewritten %n&quot;</command>
<description></description>
<range>*</range>
<patterns>*</patterns>
<other-files/>
<text-files/>
</action>
<action>
<icon>emblem-OK</icon>
<name>Add tags</name>
<submenu></submenu>
<unique-id>1741093759037048-1</unique-id>
<command>/home/greg/.config/Thunar/addtags.sh %F</command>
<description>Add keywords to the image using ExifTool</description>
<range>*</range>
<patterns>*.jpg;*.jpeg;*.png;*.gif;*.mp4;*.webm</patterns>
<image-files/>
<other-files/>
<video-files/>
</action>
<action>
<icon>archlinux-logo</icon>
<name>Hyprpaper!</name>
<submenu></submenu>
<unique-id>1747392640727479-1</unique-id>
<command>/home/greg/Dev/Scripts/hypaper %f</command>
<description></description>
<range>*</range>
<patterns>*.png;*.webp;*.jpg;*.jpeg</patterns>
<image-files/>
</action>
</actions>

0
bluetuith/bluetuith.conf Normal file
View File

25
bspwm/bspwm_resize.sh Executable file
View File

@@ -0,0 +1,25 @@
#!/bin/bash
[ "$#" -eq 3 ] || { echo "Needs exactly three arguments."; exit 1; }
motion="$1"
direction="$2"
size="$3"
if [ "$motion" = 'expand' ]; then
# These expand the window's given side
case "$direction" in
north) bspc node -z top 0 -"$size" ;;
east) bspc node -z right "$size" 0 ;;
south) bspc node -z bottom 0 "$size" ;;
west) bspc node -z left -"$size" 0 ;;
esac
else
# These contract the window's given side
case "$direction" in
north) bspc node -z top 0 "$size" ;;
east) bspc node -z right -"$size" 0 ;;
south) bspc node -z bottom 0 -"$size" ;;
west) bspc node -z left "$size" 0 ;;
esac
fi

78
bspwm/bspwmrc Executable file
View File

@@ -0,0 +1,78 @@
#! /bin/sh
killall picom
killall uim-xim
killall uim-toolbar-gtk-systray
killall eww
exec ~/.screenlayout/dual.sh &
pgrep -x sxhkd > /dev/null || sxhkd -m -1 &
setxkbmap -layout "us,ru" -option "grp:caps_toggle" &
bspc monitor eDP-1 -d Browsing I II III IV Coding Zettlr Messengers Admin
bspc monitor HDMI-1 -d V VI VII
bspc config border_width 3
bspc config window_gap 28
if [[ -e /tmp/grayscale ]] then
picom --window-shader-fg=/home/greg/.config/picom/picom.conf.glsl &
nitrogen --set-auto "/home/greg/Pictures/Wallpapers/desert_grayscale.jpg"
bspc config focused_border_color \#747474
bspc config presel_feedback_color \#747474
bspc config marked_border_color \#747474
else
picom &
nitrogen --restore &
bspc config focused_border_color \#027C9B
bspc config presel_feedback_color \#027C9B
bspc config marked_border_color \#027C9B
bspc config automatic_scheme alternate
fi
uim-xim &
uim-toolbar-gtk-systray &
xmousepasteblock &
xsel -fin </dev/null &
killall xbindkeys
xbindkeys &
bspc config split_ratio 0.5
bspc config borderless_monocle true
bspc config gapless_monocle true
#bspc config focus_follows_pointer true
# Discord is an ass
bspc config ignore_ewmh_focus true
exec ~/.config/polybar/hack/launch.sh &
exec ~/.config/bspwm/polyhide.sh &
bspc rule -a zenity state=floating
bspc rule -a Gimp desktop='^8' state=floating follow=on
bspc rule -a Kupfer.py focus=on
bspc rule -a Screenkey manage=off
bspc rule -a nitrogen state=floating sticky=on
bspc rule -a TelegramDesktop desktop='^8' follow=off
bspc rule -a Element desktop='^8' follow=off
bspc rule -a WebCord desktop='^8' follow=off
bspc rule -a superProductivity desktop='^7' follow=off
bspc rule -a steam desktop='^9' follow=off
bspc rule -a matplotlib state=floating
bspc rule -a "kitty" rectangle=800x500+560+290
bspc rule -a "Extract" state=floating
bspc config pointer_modifier mod4
# exec ~/.config/bspwm/marked.sh &
if [ ! -e /tmp/startup_completed ]; then
pactl set-sink-volume 0 0%
telegram-desktop &
# element-desktop &
# webcord &
nextcloud &
superproductivity &
sleep 0.25
touch /tmp/startup_completed
fi

41
bspwm/bspwmrc.save Executable file
View File

@@ -0,0 +1,41 @@
#! /bin/sh
pgrep -x sxhkd > /dev/null || sxhkd &
$HOME/.config/polybar/launch.sh --hack
setxkbmap -layout "us,ru" -option "grp:alt_shift_toggle,grp:caps_toggle" &
bspc monitor -d Browsing II III IV V VI Coding Zettlr Messengers Admin Gaming
bspc config border_width 2
bspc config window_gap 12
bspc config split_ratio 0.52
bspc config borderless_monocle true
bspc config gapless_monocle true
# Discord is an ass
bspc config ignore_ewmh_focus true
bspc rule -a Gimp desktop='^8' state=floating follow=on
bspc rule -a Firefox desktop='^2'
bspc rule -a mplayer2 state=floating
bspc rule -a Kupfer.py focus=on
bspc rule -a Screenkey manage=off
bspc rule -a TelegramDesktop desktop='^9' follow=off
bspc rule -a Element desktop='^9' follow=off
bspc rule -a WebCord desktop='^9' follow=off
bspc rule -a steam desktop='^11' state=floating
~/.config/bspwm/games.sh
bspc config pointer_modifier mod4
if [ ! -e /tmp/startup_completed ]; then
bspc rule ...
telegram-desktop &
element-desktop &
webcord &
nextcloud &
sleep 0.25
bspc rule ...
touch /tmp/startup_completed
fi

13
bspwm/capsindicator.sh Executable file
View File

@@ -0,0 +1,13 @@
#!/bin/bash
# Get the current layout
layout=$(setxkbmap -query | grep layout | awk '{print $2}')
# Check if the layout is Russian
if [ "$layout" = "ru" ]; then
# Turn on the Caps Lock indicator (you may need to adjust this command based on your system)
xset led named "Caps Lock"
else
# Turn off the Caps Lock indicator
xset -led named "Caps Lock"
fi

22
bspwm/cryfsunlock.sh Executable file
View File

@@ -0,0 +1,22 @@
#!/bin/bash
CRYFS_DIR="/home/greg/.cryfs/"
CRYFS_MOUNT_DIR="/home/greg/cryfs/"
# Retrieve volume name with zenity
VOLUME=$(zenity --entry --title="Unlock Cryfs" --text="Volume:")
# Retrieve password with zenity
PASSWORD=$(zenity --password --title="Unlock Cryfs" --text="Volume password:")
# Unlock the volume
cryfs "$CRYFS_DIR$VOLUME" $CRYFS_MOUNT_DIR$VOLUME <<< $PASSWORD
# If the unlock was successful, show a success message
if [ $? -eq 0 ]; then
notify-send "Unlock Cryfs" "Volume $VOLUME unlocked successfully"
exit 0
else
notify-send "Unlock Cryfs" "Failed to unlock volume $VOLUME"
exit 1
fi

8
bspwm/games.sh Executable file
View File

@@ -0,0 +1,8 @@
#!/bin/sh
steamlib=/games/SteamLibrary # path to your steamlibrary
mygames=$(ls $steamlib/steamapps/appmanifest_*.acf | sed 's/[^0-9]*//g') # this sed command removes everything but the digits
for game in $mygames; do
bspc rule -a steam_app_$game desktop=^11 state=fullscreen floating=on
done

10
bspwm/grayscale.sh Executable file
View File

@@ -0,0 +1,10 @@
#!/bin/bash
if [[ -e "/tmp/grayscale" ]]; then
rm /tmp/grayscale
# nitrogen --save --set-auto "/home/greg/Pictures/Wallpapers/blue_rainy_leaves.jpg"
else
touch /tmp/grayscale
# nitrogen --save --set-auto "/home/greg/Pictures/Wallpapers/berlin-tower-grayscale1.jpg"
fi
bspc wm -r

1
bspwm/lockscreen.sh Executable file
View File

@@ -0,0 +1 @@
betterlockscreen --lock

11
bspwm/margin.sh Executable file
View File

@@ -0,0 +1,11 @@
#!/bin/bash
if [ $( bspc config window_gap ) == 28 ]; then
bspc config window_gap 4
exit
fi
if [ $( bspc config window_gap ) == 4 ]; then
bspc config window_gap 28
exit
fi

19
bspwm/marked.sh Executable file
View File

@@ -0,0 +1,19 @@
#!/bin/bash
while read -r line; do
case "$line" in
*'marked on')
# Get all marked windows and set their border width
for win in $(bspc query -N -n .marked); do
bspc config -n "$win" border_width 10
done
;;
*'marked off')
# Set border width for all windows to 2
for win in $(bspc query -N -n .marked); do
bspc config -n "$win" border_width 2
done
;;
esac
done < <(bspc subscribe report node_flag)

7
bspwm/monocle_improved.sh Executable file
View File

@@ -0,0 +1,7 @@
#!/bin/bash
for node_i in $(bspc query -N -n '.!focused.window' -d focused); do
bspc node $node_i -g hidden;
done
bspc desktop -l next

14
bspwm/music.sh Executable file
View File

@@ -0,0 +1,14 @@
bspc wm -h off
kitty btop &
sleep 0.5
kitty cava &
sleep 0.5
bspwm_resize contract north 250
sleep 0.5
bspwm_resize expand west 100
bspc node older -f
bspc wm -h on
ncmpcpp

17
bspwm/polyhide.sh Executable file
View File

@@ -0,0 +1,17 @@
#!/bin/bash
if [ $( bspc config top_padding ) == 36 ]; then
polybar-msg cmd hide
sleep .0
bspc config top_padding 0
bspc config bottom_padding 0
bspc config left_padding 0
bspc config right_padding 0
else
bspc config top_padding 36
bspc config bottom_padding 9
bspc config left_padding 11
bspc config right_padding 11
sleep .0
polybar-msg cmd show
fi

9
bspwm/prevent_suspend.sh Executable file
View File

@@ -0,0 +1,9 @@
# Check if xset q has "timeout" equal to 0 and if so, return 1
if xset q | grep "timeout: 0" >/dev/null; then
xset s 580 10
echo "Suspend lock disabled"
else
xset s off
echo "Suspend lock enabled"
fi

17
bspwm/proxy.sh Executable file
View File

@@ -0,0 +1,17 @@
#!/bin/bash
TOGGLE_FILE="/tmp/toggle_ssocks"
if [ -f "$TOGGLE_FILE" ]; then
echo "Enabling spoofdpi"
killall sslocal
http_proxy="" spoof-dpi -addr 127.0.0.1 -port 1080 &
rm "$TOGGLE_FILE"
else
echo "Enabling shadowsocks"
killall spoof-dpi
http_proxy="" sslocal -c /etc/shadowsocks-rust/mega.json &
touch "$TOGGLE_FILE"
fi

22
bspwm/ptt.sh Executable file
View File

@@ -0,0 +1,22 @@
#!/bin/bash
# Replace 'F12' with your configured push-to-talk key
PUSH_TO_TALK_KEY="F7"
# Get the window ID of the Discord application
DISCORD_WINDOW=$(xdotool search --onlyvisible --class "discord")
# Loop to keep the script running
while true; do
# Check if the Discord window is active
if xdotool getactivewindow getwindowname | grep -q "Discord"; then
# Check if the push-to-talk key is pressed
if xinput --query-state "AT Translated Set 2 keyboard" | grep -q "key$$68$$=down"; then
# Simulate key press
xdotool keydown $PUSH_TO_TALK_KEY
sleep 0.1 # Hold the key down for a short duration
xdotool keyup $PUSH_TO_TALK_KEY
fi
fi
sleep 0.1 # Check every 100ms
done

34
bspwm/set_window_size.sh Executable file
View File

@@ -0,0 +1,34 @@
# Get current window size
current_size=$(bspc query -T -n focused | jq -r '.rectangle.width, .rectangle.height')
#current_width=$(echo $current_size | head -n 1)
#current_height=$(echo $current_size | tail -n 1)
current_width=$(echo "$current_size" | sed -n '1p')
current_height=$(echo "$current_size" | sed -n '2p')
# Define target size
target_width=$1
target_height=$2
echo "Current size: $current_width x $current_height"
# Calculate dx and dy
dx=$((target_width - current_width))
dy=$((target_height - current_height))
# Resize the window horizontally
if [ $dx -gt 0 ]; then
handle="right"
else
handle="left"
fi
bspc node --resize $handle ${dx#-} 0 # Use absolute value for dx
# Resize the window vertically
if [ $dy -gt 0 ]; then
handle="bottom"
else
handle="top"
fi
bspc node --resize $handle 0 ${dy#-} # Use absolute value for dy

26
bspwm/shrink.sh Executable file
View File

@@ -0,0 +1,26 @@
#!/bin/bash
if [ $( bspc config left_padding ) == 11 ]; then
bspc config left_padding 100
bspc config right_padding 100
exit
fi
if [ $( bspc config left_padding ) == 100 ]; then
bspc config left_padding 200
bspc config right_padding 200
exit
fi
if [ $( bspc config left_padding ) == 200 ]; then
bspc config left_padding 300
bspc config right_padding 300
exit
fi
if [ $( bspc config left_padding ) == 300 ]; then
bspc config left_padding 11
bspc config right_padding 11
exit
fi

72
bspwm/sxseq.sh Executable file
View File

@@ -0,0 +1,72 @@
#!/bin/bash
# # Variables
# DB_PATH="/home/greg/Nextcloud2/Backups/keepass.kdbx"
# ENTRY_NAME="logseq"
# VAULT_LOCATION="/home/greg/.cryfs/logseq"
# MOUNT_POINT="/home/greg/cryfs/logseq" # Change this to your CryFS mount point
#
# # Retrieve the password from the KeePassXC database
# CREDENTIALS=$(keepassxc-cli show -s "$DB_PATH" "$ENTRY_NAME")
# PASSWORD=$(echo "$CREDENTIALS" | grep 'Password:' | cut -d ' ' -f 2)
#
# # Check if the password was retrieved successfully
# if [ $? -ne 0 ]; then
# echo "Failed to retrieve the password from the database."
# exit 1
# fi
#
# # Unlock the CryFS volume
# cryfs "$VAULT_LOCATION" "$MOUNT_POINT" <<< "$PASSWORD"
#
# # Check if the CryFS command was successful
# if [ $? -eq 0 ]; then
# echo "CryFS volume unlocked successfully."
# logseq
# cryfs-unmount "$MOUNT_POINT"
# else
# echo "Failed to unlock the CryFS volume."
# exit 1
# fi
#!/bin/bash
# Variables
DB_PATH="/home/greg/Nextcloud2/Backups/keepass.kdbx"
ENTRY_NAME="logseq"
VAULT_LOCATION="/home/greg/.cryfs/logseq"
MOUNT_POINT="/home/greg/cryfs/logseq" # Change this to your CryFS mount point
# Retrieve the password from the KeePassXC database using zenity
KEEPASS_PASSWORD=$(zenity --password --title="Cumseq" --text="Enter the password for the KeePass database:")
# Check if the user canceled the dialog
if [ $? -ne 0 ]; then
notify-send "Password retrieval canceled."
exit 1
fi
CREDENTIALS=$(keepassxc-cli show -s "$DB_PATH" "$ENTRY_NAME" <<< "$KEEPASS_PASSWORD")
if [ $? -ne 0 ]; then
notify-send "KeePassXC error" "Was the master password correct?"
exit 1
fi
PASSWORD=$(echo "$CREDENTIALS" | grep 'Password:' | cut -d ' ' -f 2)
# Unlock the CryFS volume
cryfs "$VAULT_LOCATION" "$MOUNT_POINT" <<< "$PASSWORD"
# Check if the CryFS command was successful
if [ $? -eq 0 ]; then
notify-send "Success" "CryFS volume unlocked successfully."
logseq
cryfs-unmount "$MOUNT_POINT"
noity-send "Loseq session finished" "CryFS volume will now be unmounted."
exit 0
else
notify-send "Error" "Failed to unlock the CryFS volume."
exit 1
fi

224
bspwm/toggle-monitor-grayscale.sh Executable file
View File

@@ -0,0 +1,224 @@
#!/bin/bash
# should also work with compositor=compton, untested
compositor=picom
function usage {
bin=$(basename $0)
echo
echo "Toggle monitors between color and grayscale mode."
echo
echo "$bin [$compositor|nvidia|ddc|auto]"
echo "$bin $compositor [$compositor args]"
echo "$bin nvidia [nv mon]"
echo "$bin ddc [ddc mon]"
echo
echo "$compositor: use a GLX shader to set grayscale"
echo "nvidia: use NVIDIA proprietary driver Digital Vibrance setting to set grayscale"
echo "ddc: use DDC/CI monitor protocol to set the monitor saturation to 0 (grayscale) if supported by monitor"
echo "auto: use $compositor if running, otherwise nvidia if available, otherwise ddc if available"
echo
echo "$compositor args: in $compositor mode, optional $compositor parameters"
echo
echo "nv mon: in nvidia mode, an optional monitor name as enumerated by xrandr."
echo " if unspecified, apply to all monitors managed by the NVIDIA driver"
echo "ddc mon: in ddc mode, optional ddcutil options to identify the monitor. See 'man ddcutil'"
echo " if unspecified, apply to the first monitor detected by ddcutil"
echo "if invoked with no argument, auto is used."
echo
exit 0
}
function toggle_nvidia {
dpy=$1
value=$(nvidia-settings -t -q DigitalVibrance)
# set a value in ]-1024..0[ range to desaturate colors instead of full grayscale
# -1024 => full grayscale
desaturate_value=-1024
if (( value == $desaturate_value )); then
value=0
toggle_mode="color"
else
value=$desaturate_value
toggle_mode="grayscale"
fi
if [ -n "$dpy" ]; then
param="[DPY:$dpy]/DigitalVibrance"
else
param="DigitalVibrance"
fi
nvidia-settings -a ${param}=${value} > /dev/null
}
function toggle_compositor {
if $compositor --help | grep legacy-backends > /dev/null; then
use_experimental_backends=1;
grep_string="window-shader-fg"
else
use_experimental_backends=0;
grep_string="glx-fshader-win"
fi
if pgrep -a -x $compositor | grep $grep_string > /dev/null; then
pkill -x $compositor
sleep 1
$compositor $* -b
toggle_mode="color"
else
pkill -x $compositor
sleep 1
if (( $use_experimental_backends == 1 )); then
tmpfile=$(mktemp)
trap 'rm -f "${tmpfile}"' EXIT
cat > ${tmpfile} <<EOF
#version 330
in vec2 texcoord;
uniform sampler2D tex;
uniform float opacity;
vec4 default_post_processing(vec4 c);
vec4 window_shader() {
vec4 c = default_post_processing(texelFetch(tex, ivec2(texcoord), 0));
float y = dot(c.rgb, vec3(0.2126, 0.7152, 0.0722));
c = opacity*vec4(y, y, y, c.a);
return c;
}
EOF
$compositor $* -b --backend glx --window-shader-fg ${tmpfile} 2> /dev/null
else
shader='uniform sampler2D tex; uniform float opacity; void main() { vec4 c = texture2D(tex, gl_TexCoord[0].xy); float y = dot(c.rgb, vec3(0.2126, 0.7152, 0.0722)); gl_FragColor = opacity*vec4(y, y, y, c.a); }'
$compositor $* -b --backend glx --glx-fshader-win "${shader}" 2> /dev/null
fi
toggle_mode="grayscale"
fi
}
function toggle_ddc {
out=($(ddcutil $* getvcp 8a -t))
if (( $? != 0 )); then
echo "ddc: this monitor does not support saturation control"
exit 1
fi
# out array:
#
# VCP 8A C 100 200
# | |
# cur max
if (( ${#out[@]} != 5 )); then
echo "ddc: unexpected output getting current saturation state"
exit 1
fi
cur_saturation=${out[3]}
max_saturation=${out[4]}
# set a value in ]0..max/2[ range to desaturate colors instead of full grayscale
# 0 => full grayscale
desaturate_value=0
if (( cur_saturation == desaturate_value )); then
new_saturation=$(( max_saturation / 2 )) # nominal saturation
toggle_mode="color"
else
new_saturation=$desaturate_value
toggle_mode="grayscale"
fi
ddcutil $* setvcp 8a $new_saturation
}
mode=$1
case $mode in
--help|-h)
usage
;;
$compositor)
if ! pgrep -x $compositor > /dev/null; then
echo "$compositor is not running"
exit 1
fi
;;
nvidia)
if ! which nvidia-settings &> /dev/null; then
echo "nvidia-settings is not installed"
exit 1
fi
;;
ddc)
if ! which ddcutil &> /dev/null; then
echo "ddcutil is not installed"
exit 1
fi
;;
*)
[ -z "$mode" ] && mode=auto
if [ "$mode" = "auto" ]; then
if pgrep -x $compositor > /dev/null; then
mode=$compositor
elif which nvidia-settings &> /dev/null; then
mode=nvidia
elif which ddcutil &> /dev/null; then
mode=ddc
else
echo "neither $compositor is running, nor nvidia-settings installed, nor ddcutil installed"
exit 1
fi
else
usage
fi
esac
# pass eventual remaining arguments to toggle_* function
if (( $# > 0 )); then
shift
fi
if [ "$mode" = "nvidia" ]; then
toggle_nvidia $*
elif [ "$mode" = "$compositor" ]; then
toggle_compositor $*
else
toggle_ddc $*
fi
if (( $? == 0 )); then
echo "$mode: set to $toggle_mode"
else
echo "$mode: toggle failed"
fi

8
bspwm/toggle-picom.sh Executable file
View File

@@ -0,0 +1,8 @@
#!/bin/bash
pid=$(pgrep -x picom)
if [ -z "$pid" ]; then
picom -b
else
kill $pid
fi

7
bspwm/touchpad.sh Executable file
View File

@@ -0,0 +1,7 @@
i#!/bin/bash
if [ "$(xinput list-props 13 | grep "Device Enabled" | awk '{print $NF}')" -eq 0 ]; then
xinput enable 13
else
xinput disable 13
fi

254
btop/btop.conf Normal file
View File

@@ -0,0 +1,254 @@
#? Config file for btop v. 1.4.3
#* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
#* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
color_theme = "TTY"
#* If the theme set background should be shown, set to False if you want terminal background transparency.
theme_background = False
#* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
truecolor = True
#* Set to true to force tty mode regardless if a real tty has been detected or not.
#* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
force_tty = False
#* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
#* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
#* Use whitespace " " as separator between different presets.
#* Example: "cpu:0:default,mem:0:tty,proc:1:default cpu:0:braille,proc:0:tty"
presets = "cpu:0:braille mem:0:tty"
#* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
#* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
vim_keys = False
#* Rounded corners on boxes, is ignored if TTY mode is ON.
rounded_corners = False
#* Default symbols to use for graph creation, "braille", "block" or "tty".
#* "braille" offers the highest resolution but might not be included in all fonts.
#* "block" has half the resolution of braille but uses more common characters.
#* "tty" uses only 3 different symbols but will work with most fonts and should work in a real TTY.
#* Note that "tty" only has half the horizontal resolution of the other two, so will show a shorter historical view.
graph_symbol = "braille"
# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
graph_symbol_cpu = "default"
# Graph symbol to use for graphs in gpu box, "default", "braille", "block" or "tty".
graph_symbol_gpu = "default"
# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
graph_symbol_mem = "default"
# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
graph_symbol_net = "default"
# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
graph_symbol_proc = "default"
#* Manually set which boxes to show. Available values are "cpu mem net proc" and "gpu0" through "gpu5", separate values with whitespace.
shown_boxes = "proc cpu mem net"
#* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs.
update_ms = 1200
#* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
#* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
proc_sorting = "cpu lazy"
#* Reverse sorting order, True or False.
proc_reversed = False
#* Show processes as a tree.
proc_tree = False
#* Use the cpu graph colors in the process list.
proc_colors = True
#* Use a darkening gradient in the process list.
proc_gradient = True
#* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
proc_per_core = True
#* Show process memory as bytes instead of percent.
proc_mem_bytes = False
#* Show cpu graph for each process.
proc_cpu_graphs = True
#* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
proc_info_smaps = False
#* Show proc box on left side of screen instead of right.
proc_left = False
#* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
proc_filter_kernel = False
#* In tree-view, always accumulate child process resources in the parent process.
proc_aggregate = False
#* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
#* Select from a list of detected attributes from the options menu.
cpu_graph_upper = "Auto"
#* Sets the CPU stat shown in lower half of the CPU graph, "total" is always available.
#* Select from a list of detected attributes from the options menu.
cpu_graph_lower = "Auto"
#* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off".
show_gpu_info = "Auto"
#* Toggles if the lower CPU graph should be inverted.
cpu_invert_lower = True
#* Set to True to completely disable the lower CPU graph.
cpu_single_graph = False
#* Show cpu box at bottom of screen instead of top.
cpu_bottom = False
#* Shows the system uptime in the CPU box.
show_uptime = True
#* Show cpu temperature.
check_temp = True
#* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
cpu_sensor = "Auto"
#* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
show_coretemp = True
#* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
#* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
#* Format "x:y" x=core with wrong temp, y=core with correct temp, use space as separator between multiple entries.
#* Example: "4:0 5:1 6:3"
cpu_core_map = ""
#* Which temperature scale to use, available values: "celsius", "fahrenheit", "kelvin" and "rankine".
temp_scale = "celsius"
#* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
base_10_sizes = False
#* Show CPU frequency.
show_cpu_freq = True
#* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
#* Special formatting: /host = hostname | /user = username | /uptime = system uptime
clock_format = "%X"
#* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
background_update = True
#* Custom cpu model name, empty string to disable.
custom_cpu_name = ""
#* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
#* Begin line with "exclude=" to change to exclude filter, otherwise defaults to "most include" filter. Example: disks_filter="exclude=/boot /home/user".
disks_filter = ""
#* Show graphs instead of meters for memory values.
mem_graphs = True
#* Show mem box below net box instead of above.
mem_below_net = False
#* Count ZFS ARC in cached and available memory.
zfs_arc_cached = True
#* If swap memory should be shown in memory box.
show_swap = True
#* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
swap_disk = True
#* If mem box should be split to also show disks info.
show_disks = True
#* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
only_physical = True
#* Read disks list from /etc/fstab. This also disables only_physical.
use_fstab = True
#* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
zfs_hide_datasets = False
#* Set to true to show available disk space for privileged users.
disk_free_priv = False
#* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
show_io_stat = True
#* Toggles io mode for disks, showing big graphs for disk read/write speeds.
io_mode = False
#* Set to True to show combined read/write io graphs in io mode.
io_graph_combined = False
#* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
#* Example: "/mnt/media:100 /:20 /boot:1".
io_graph_speeds = ""
#* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
net_download = 100
net_upload = 100
#* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
net_auto = True
#* Sync the auto scaling for download and upload to whichever currently has the highest scale.
net_sync = True
#* Starts with the Network Interface specified here.
net_iface = ""
#* "True" shows bitrates in base 10 (Kbps, Mbps). "False" shows bitrates in binary sizes (Kibps, Mibps, etc.). "Auto" uses base_10_sizes.
base_10_bitrate = "Auto"
#* Show battery stats in top right if battery is present.
show_battery = True
#* Which battery to use if multiple are present. "Auto" for auto detection.
selected_battery = "Auto"
#* Show power stats of battery next to charge indicator.
show_battery_watts = True
#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
#* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
log_level = "WARNING"
#* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
nvml_measure_pcie_speeds = True
#* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
rsmi_measure_pcie_speeds = True
#* Horizontally mirror the GPU graph.
gpu_mirror_graph = True
#* Custom gpu0 model name, empty string to disable.
custom_gpu_name0 = ""
#* Custom gpu1 model name, empty string to disable.
custom_gpu_name1 = ""
#* Custom gpu2 model name, empty string to disable.
custom_gpu_name2 = ""
#* Custom gpu3 model name, empty string to disable.
custom_gpu_name3 = ""
#* Custom gpu4 model name, empty string to disable.
custom_gpu_name4 = ""
#* Custom gpu5 model name, empty string to disable.
custom_gpu_name5 = ""

1643
btop/btop.log Normal file
View File

File diff suppressed because it is too large Load Diff

282
cava/config Normal file
View File

@@ -0,0 +1,282 @@
## Configuration file for CAVA.
# Remove the ; to change parameters.
[general]
# Smoothing mode. Can be 'normal', 'scientific' or 'waves'. DEPRECATED as of 0.6.0
; mode = normal
# Accepts only non-negative values.
framerate = 60
# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
# new as of 0.6.0 autosens of low values (dynamic range)
# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens. DEPRECATED as of 0.6.0
; autosens = 1
; overshoot = 20
# Manual sensitivity in %. If autosens is enabled, this will only be the initial value.
# 200 means double height. Accepts only non-negative values.
; sensitivity = 100
# The number of bars (0-512). 0 sets it to auto (fill up console).
# Bars' width and space between bars in number of characters.
; bars = 0
; bar_width = 2
; bar_spacing = 1
# bar_height is only used for output in "noritake" format
; bar_height = 32
# For SDL width and space between bars is in pixels, defaults are:
; bar_width = 20
; bar_spacing = 5
# sdl_glsl have these default values, they are only used to calulate max number of bars.
; bar_width = 1
; bar_spacing = 0
# Lower and higher cutoff frequencies for lowest and highest bars
# the bandwidth of the visualizer.
# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
# Cava will automatically increase the higher cutoff if a too low band is specified.
; lower_cutoff_freq = 50
; higher_cutoff_freq = 10000
# Seconds with no input before cava goes to sleep mode. Cava will not perform FFT or drawing and
# only check for input once per second. Cava will wake up once input is detected. 0 = disable.
; sleep_timer = 0
[input]
# Audio capturing method. Possible methods are: 'fifo', 'portaudio', 'pipewire', 'alsa', 'pulse', 'sndio', 'oss', 'jack' or 'shmem'
# Defaults to 'oss', 'pipewire', 'sndio', 'jack', 'pulse', 'alsa', 'portaudio' or 'fifo', in that order, dependent on what support cava was built with.
# On Mac it defaults to 'portaudio' or 'fifo'
# On windows this is automatic and no input settings are needed.
#
# All input methods uses the same config variable 'source'
# to define where it should get the audio.
#
# For pulseaudio and pipewire 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
#
# For pipewire 'source' will be the object name or object.serial of the device to capture from.
# Both input and output devices are supported.
#
# For alsa 'source' will be the capture device.
# For fifo 'source' will be the path to fifo-file.
# For shmem 'source' will be /squeezelite-AA:BB:CC:DD:EE:FF where 'AA:BB:CC:DD:EE:FF' will be squeezelite's MAC address
#
# For sndio 'source' will be a raw recording audio descriptor or a monitoring sub-device, e.g. 'rsnd/2' or 'snd/1'. Default: 'default'.
# README.md contains further information on how to setup CAVA for sndio.
#
# For oss 'source' will be the path to a audio device, e.g. '/dev/dsp2'. Default: '/dev/dsp', i.e. the default audio device.
# README.md contains further information on how to setup CAVA for OSS on FreeBSD.
#
# For jack 'source' will be the name of the JACK server to connect to, e.g. 'foobar'. Default: 'default'.
# README.md contains further information on how to setup CAVA for JACK.
#
; method = pulse
; source = auto
; method = pipewire
; source = auto
; method = alsa
; source = hw:Loopback,1
; method = fifo
; source = /tmp/mpd.fifo
; method = shmem
; source = /squeezelite-AA:BB:CC:DD:EE:FF
; method = portaudio
; source = auto
; method = sndio
; source = default
; method = oss
; source = /dev/dsp
; method = jack
; source = default
# The options 'sample_rate', 'sample_bits', 'channels' and 'autoconnect' can be configured for some input methods:
# sample_rate: fifo, pipewire, sndio, oss
# sample_bits: fifo, pipewire, sndio, oss
# channels: sndio, oss, jack
# autoconnect: jack
# Other methods ignore these settings.
#
# For 'sndio' and 'oss' they are only preferred values, i.e. if the values are not supported
# by the chosen audio device, the device will use other supported values instead.
# Example: 48000, 32 and 2, but the device only supports 44100, 16 and 1, then it
# will use 44100, 16 and 1.
#
; sample_rate = 44100
; sample_bits = 16
; channels = 2
; autoconnect = 2
[output]
# Output method. Can be 'ncurses', 'noncurses', 'raw', 'noritake', 'sdl'
# or 'sdl_glsl'.
# 'noncurses' (default) uses a buffer and cursor movements to only print
# changes from frame to frame in the terminal. Uses less resources and is less
# prone to tearing (vsync issues) than 'ncurses'.
#
# 'raw' is an 8 or 16 bit (configurable via the 'bit_format' option) data
# stream of the bar heights that can be used to send to other applications.
# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
#
# 'noritake' outputs a bitmap in the format expected by a Noritake VFD display
# in graphic mode. It only support the 3000 series graphical VFDs for now.
#
# 'sdl' uses the Simple DirectMedia Layer to render in a graphical context.
# 'sdl_glsl' uses SDL to create an OpenGL context. Write your own shaders or
# use one of the predefined ones.
; method = noncurses
# Orientation of the visualization. Can be 'bottom', 'top', 'left' or 'right'.
# Default is 'bottom'. Other orientations are only supported on sdl and ncruses
# output. Note: many fonts have weird glyphs for 'top' and 'right' characters,
# which can make ncurses not look right.
; orientation = bottom
# Visual channels. Can be 'stereo' or 'mono'.
# 'stereo' mirrors both channels with low frequencies in center.
# 'mono' outputs left to right lowest to highest frequencies.
# 'mono_option' set mono to either take input from 'left', 'right' or 'average'.
# set 'reverse' to 1 to display frequencies the other way around.
; channels = stereo
; mono_option = average
; reverse = 0
# Raw output target. A fifo will be created if target does not exist.
; raw_target = /dev/stdout
# Raw data format. Can be 'binary' or 'ascii'.
; data_format = binary
# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
; bit_format = 16bit
# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
; ascii_max_range = 1000
# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
; bar_delimiter = 59
; frame_delimiter = 10
# sdl window size and position. -1,-1 is centered.
; sdl_width = 1000
; sdl_height = 500
; sdl_x = -1
; sdl_y= -1
; sdl_full_screen = 0
# set label on bars on the x-axis. Can be 'frequency' or 'none'. Default: 'none'
# 'frequency' displays the lower cut off frequency of the bar above.
# Only supported on ncurses and noncurses output.
; xaxis = none
# enable alacritty synchronized updates. 1 = on, 0 = off
# removes flickering in alacritty terminal emulator.
# defaults to off since the behaviour in other terminal emulators is unknown
; alacritty_sync = 0
# Shaders for sdl_glsl, located in $HOME/.config/cava/shaders
; vertex_shader = pass_through.vert
; fragment_shader = bar_spectrum.frag
; for glsl output mode, keep rendering even if no audio
; continuous_rendering = 0
# disable console blank (screen saver) in tty
# (Not supported on FreeBSD)
; disable_blanking = 0
# show a flat bar at the bottom of the screen when idle, 1 = on, 0 = off
; show_idle_bar_heads = 0
# show waveform instead of frequency spectrum, 1 = on, 0 = off
; waveform = 1
[color]
# Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
# Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires
# a terminal that can change color definitions such as Gnome-terminal or rxvt.
# default is to keep current terminal color
; background = default
; foreground = default
# SDL and sdl_glsl only support hex code colors, these are the default:
; background = '#111111'
; foreground = '#33ffff'
# Gradient mode, only hex defined colors are supported,
# background must also be defined in hex or remain commented out. 1 = on, 0 = off.
# You can define as many as 8 different colors. They range from bottom to top of screen
gradient = 1
gradient_count = 3
gradient_color_1 = '#9E2238'
gradient_color_2 = '#BB6F80'
gradient_color_3 = '#EB9FB0'
;gradient_color_4 = '#68d4f1'
;gradient_color_3 = '#50a3b5'
;gradient_color_2 = '#027c9b'
;gradient_color_1 = '#1e4950'
; gradient_color_5 = '#ff5148'
; gradient_color_6 = '#ff5d56'
; gradient_color_7 = '#ff6863'
; gradient_color_8 = '#ff736f'
[smoothing]
# Percentage value for integral smoothing. Takes values from 0 - 100.
# Higher values means smoother, but less precise. 0 to disable.
# DEPRECATED as of 0.8.0, use noise_reduction instead
; integral = 77
# Disables or enables the so-called "Monstercat smoothing" with or without "waves". Set to 0 to disable.
; monstercat = 0
; waves = 0
# Set gravity percentage for "drop off". Higher values means bars will drop faster.
# Accepts only non-negative values. 50 means half gravity, 200 means double. Set to 0 to disable "drop off".
# DEPRECATED as of 0.8.0, use noise_reduction instead
; gravity = 100
# In bar height, bars that would have been lower that this will not be drawn.
# DEPRECATED as of 0.8.0
; ignore = 0
# Noise reduction, int 0 - 100. default 77
# the raw visualization is very noisy, this factor adjusts the integral and gravity filters to keep the signal smooth
# 100 will be very slow and smooth, 0 will be fast but noisy.
; noise_reduction = 77
[eq]
# This one is tricky. You can have as much keys as you want.
# Remember to uncomment more than one key! More keys = more precision.
# Look at readme.md on github for further explanations and examples.
; 1 = 1 # bass
; 2 = 1
; 3 = 1 # midtone
; 4 = 1
; 5 = 1 # treble

79
cava/shaders/bar_spectrum.frag Normal file
View File

@@ -0,0 +1,79 @@
#version 330
in vec2 fragCoord;
out vec4 fragColor;
// bar values. defaults to left channels first (low to high), then right (high to low).
uniform float bars[512];
uniform int bars_count; // number of bars (left + right) (configurable)
uniform int bar_width; // bar width (configurable), not used here
uniform int bar_spacing; // space bewteen bars (configurable)
uniform vec3 u_resolution; // window resolution
//colors, configurable in cava config file (r,g,b) (0.0 - 1.0)
uniform vec3 bg_color; // background color
uniform vec3 fg_color; // foreground color
uniform int gradient_count;
uniform vec3 gradient_colors[8]; // gradient colors
vec3 normalize_C(float y,vec3 col_1, vec3 col_2, float y_min, float y_max)
{
//create color based on fraction of this color and next color
float yr = (y - y_min) / (y_max - y_min);
return col_1 * (1.0 - yr) + col_2 * yr;
}
void main()
{
// find which bar to use based on where we are on the x axis
float x = u_resolution.x * fragCoord.x;
int bar = int(bars_count * fragCoord.x);
//calculate a bar size
float bar_size = u_resolution.x / bars_count;
//the y coordinate and bar values are the same
float y = bars[bar];
// make sure there is a thin line at bottom
if (y * u_resolution.y < 1.0)
{
y = 1.0 / u_resolution.y;
}
//draw the bar up to current height
if (y > fragCoord.y)
{
//make some space between bars basen on settings
if (x > (bar + 1) * (bar_size) - bar_spacing)
{
fragColor = vec4(bg_color,1.0);
}
else
{
if (gradient_count == 0)
{
fragColor = vec4(fg_color,1.0);
}
else
{
//find which color in the configured gradient we are at
int color = int((gradient_count - 1) * fragCoord.y);
//find where on y this and next color is supposed to be
float y_min = color / (gradient_count - 1.0);
float y_max = (color + 1.0) / (gradient_count - 1.0);
//make color
fragColor = vec4(normalize_C(fragCoord.y, gradient_colors[color], gradient_colors[color + 1], y_min, y_max), 1.0);
}
}
}
else
{
fragColor = vec4(bg_color,1.0);
}
}

34
cava/shaders/northern_lights.frag Normal file
View File

@@ -0,0 +1,34 @@
#version 330
in vec2 fragCoord;
out vec4 fragColor;
// bar values. defaults to left channels first (low to high), then right (high to low).
uniform float bars[512];
uniform int bars_count; // number of bars (left + right) (configurable)
uniform vec3 u_resolution; // window resolution, not used here
//colors, configurable in cava config file
uniform vec3 bg_color; // background color(r,g,b) (0.0 - 1.0), not used here
uniform vec3 fg_color; // foreground color, not used here
void main()
{
// find which bar to use based on where we are on the x axis
int bar = int(bars_count * fragCoord.x);
float bar_y = 1.0 - abs((fragCoord.y - 0.5)) * 2.0;
float y = (bars[bar]) * bar_y;
float bar_x = (fragCoord.x - float(bar) / float(bars_count)) * bars_count;
float bar_r = 1.0 - abs((bar_x - 0.5)) * 2;
bar_r = bar_r * bar_r * 2;
// set color
fragColor.r = fg_color.x * y * bar_r;
fragColor.g = fg_color.y * y * bar_r;
fragColor.b = fg_color.z * y * bar_r;
}

14
cava/shaders/pass_through.vert Normal file
View File

@@ -0,0 +1,14 @@
#version 330
// Input vertex data, different for all executions of this shader.
layout(location = 0) in vec3 vertexPosition_modelspace;
// Output data ; will be interpolated for each fragment.
out vec2 fragCoord;
void main()
{
gl_Position = vec4(vertexPosition_modelspace,1);
fragCoord = (vertexPosition_modelspace.xy+vec2(1,1))/2.0;
}

53
cava/shaders/spectrogram.frag Normal file
View File

@@ -0,0 +1,53 @@
#version 330
in vec2 fragCoord;
out vec4 fragColor;
// bar values. defaults to left channels first (low to high), then right (high
// to low).
uniform float bars[512];
uniform int bars_count; // number of bars (left + right) (configurable)
uniform int bar_width; // bar width (configurable), not used here
uniform int bar_spacing; // space bewteen bars (configurable)
uniform vec3 u_resolution; // window resolution
// colors, configurable in cava config file (r,g,b) (0.0 - 1.0)
uniform vec3 bg_color; // background color
uniform vec3 fg_color; // foreground color
uniform int gradient_count;
uniform vec3 gradient_colors[8]; // gradient colors
uniform sampler2D inputTexture; // Texture from the first render pass
vec3 normalize_C(float y, vec3 col_1, vec3 col_2, float y_min, float y_max) {
// create color based on fraction of this color and next color
float yr = (y - y_min) / (y_max - y_min);
return col_1 * (1.0 - yr) + col_2 * yr;
}
void main() {
// find which bar to use based on where we are on the y axis
int bar = int(bars_count * fragCoord.y);
float y = bars[bar];
float band_size = 1.0 / float(bars_count);
float current_band_min = bar * band_size;
float current_band_max = (bar + 1) * band_size;
int hist_length = 512;
float win_size = 1.0 / hist_length;
if (fragCoord.x > 1.0 - win_size) {
if (fragCoord.y > current_band_min && fragCoord.y < current_band_max) {
fragColor = vec4(fg_color * y, 1.0);
}
} else {
vec2 offsetCoord = fragCoord;
offsetCoord.x += float(win_size);
fragColor = texture(inputTexture, offsetCoord);
}
}

112
cava/shaders/winamp_line_style_spectrum.frag Normal file
View File

@@ -0,0 +1,112 @@
#version 330
// Emulate the "line style" spectrum analyzer from Winamp 2.
// Try this config for a demonstration:
/*
[general]
bar_width = 2
bar_spacing = 0
higher_cutoff_freq = 22000
[output]
method = sdl_glsl
channels = mono
fragment_shader = winamp_line_style_spectrum.frag
[color]
background = '#000000'
gradient = 1
gradient_color_1 = '#319C08'
gradient_color_2 = '#29CE10'
gradient_color_3 = '#BDDE29'
gradient_color_4 = '#DEA518'
gradient_color_5 = '#D66600'
gradient_color_6 = '#CE2910'
[smoothing]
noise_reduction = 10
*/
in vec2 fragCoord;
out vec4 fragColor;
// bar values. defaults to left channels first (low to high), then right (high to low).
uniform float bars[512];
uniform int bars_count; // number of bars (left + right) (configurable)
uniform int bar_width; // bar width (configurable), not used here
uniform int bar_spacing; // space bewteen bars (configurable)
uniform vec3 u_resolution; // window resolution
//colors, configurable in cava config file (r,g,b) (0.0 - 1.0)
uniform vec3 bg_color; // background color
uniform vec3 fg_color; // foreground color
uniform int gradient_count;
uniform vec3 gradient_colors[8]; // gradient colors
vec3 normalize_C(float y,vec3 col_1, vec3 col_2, float y_min, float y_max)
{
//create color based on fraction of this color and next color
float yr = (y - y_min) / (y_max - y_min);
return col_1 * (1.0 - yr) + col_2 * yr;
}
void main()
{
// find which bar to use based on where we are on the x axis
float x = u_resolution.x * fragCoord.x;
int bar = int(bars_count * fragCoord.x);
//calculate a bar size
float bar_size = u_resolution.x / bars_count;
//the y coordinate is stretched by 4X to resemble Winamp
float y = min(bars[bar] * 4.0, 1.0);
// make sure there is a thin line at bottom
if (y * u_resolution.y < 1.0)
{
y = 1.0 / u_resolution.y;
}
vec4 bar_color;
if (gradient_count == 0)
{
bar_color = vec4(fg_color,1.0);
}
else
{
//find color in the configured gradient for the top of the bar
int color = int((gradient_count - 1) * y);
//find where on y this and next color is supposed to be
float y_min = float(color) / (gradient_count - 1.0);
float y_max = float(color + 1) / (gradient_count - 1.0);
//make a solid color for the entire bar
bar_color = vec4(normalize_C(y, gradient_colors[color], gradient_colors[color + 1], y_min, y_max), 1.0);
}
//draw the bar up to current height
if (y > fragCoord.y)
{
//make some space between bars based on settings
if (x > (bar + 1) * (bar_size) - bar_spacing)
{
fragColor = vec4(bg_color,1.0);
}
else
{
fragColor = bar_color;
}
}
else
{
fragColor = vec4(bg_color,1.0);
}
}

218
copyq/copyq.conf Normal file
View File

@@ -0,0 +1,218 @@
[General]
plugin_priority=itemimage, itemencrypted, itemfakevim, itemnotes, itempinned, itemsync, itemtags, itemtext
[Options]
activate_closes=true
activate_focuses=true
activate_item_with_single_click=false
activate_pastes=true
always_on_top=false
autocompletion=true
autostart=false
check_clipboard=true
check_selection=false
clipboard_notification_lines=0
clipboard_tab=&clipboard
close_on_unfocus=true
close_on_unfocus_delay_ms=500
command_history_size=100
confirm_exit=true
copy_clipboard=false
copy_selection=false
disable_tray=true
edit_ctrl_return=true
editor=gedit --standalone -- %1
expire_tab=0
filter_case_insensitive=true
filter_regular_expression=false
hide_main_window=true
hide_main_window_in_task_bar=false
hide_tabs=false
hide_toolbar=false
hide_toolbar_labels=true
item_data_threshold=1024
item_popup_interval=0
language=en
max_process_manager_rows=1000
maxitems=200
move=true
native_menu_bar=true
native_notifications=true
native_tray_menu=false
navigation_style=0
notification_horizontal_offset=10
notification_maximum_height=100
notification_maximum_width=300
notification_position=3
notification_vertical_offset=10
number_search=false
open_windows_on_current_screen=true
restore_geometry=true
row_index_from_one=true
run_selection=true
save_delay_ms_on_item_added=300000
save_delay_ms_on_item_edited=1000
save_delay_ms_on_item_modified=300000
save_delay_ms_on_item_moved=1800000
save_delay_ms_on_item_removed=600000
save_filter_history=false
save_on_app_deactivated=true
script_paste_delay_ms=250
show_advanced_command_settings=false
show_simple_items=false
show_tab_item_count=false
style=
tab_tree=false
tabs=&clipboard
text_tab_width=8
text_wrap=true
transparency=0
transparency_focused=0
tray_commands=true
tray_images=false
tray_item_paste=true
tray_items=5
tray_menu_open_on_left_click=false
tray_tab=
tray_tab_is_current=true
update_clipboard_owner_delay_ms=-1
window_key_press_time_ms=50
window_paste_with_ctrl_v_regex=
window_wait_after_raised_ms=50
window_wait_before_raise_ms=20
window_wait_for_modifier_released_ms=2000
window_wait_raised_ms=150
[Plugins]
itemencrypted\enabled=true
itemfakevim\enabled=true
itemimage\enabled=true
itemimage\image_editor=
itemimage\max_image_height=240
itemimage\max_image_width=320
itemimage\svg_editor=
itemnotes\enabled=true
itempinned\enabled=true
itemsync\enabled=true
itemtags\enabled=true
itemtext\enabled=true
[Shortcuts]
about=shift+f1
change_tab_icon=ctrl+shift+t
commands=f6
copy_selected_items=ctrl+c
delete_item=del
edit=f2
edit_notes=shift+f2
editor=ctrl+e
editor_background=
editor_bold=ctrl+b
editor_cancel=esc
editor_erase_style=
editor_font=
editor_foreground=
editor_italic=ctrl+i
editor_redo=ctrl+shift+z
editor_save=f2
editor_search=ctrl+f
editor_strikethrough=
editor_underline=ctrl+u
editor_undo=ctrl+z
exit=ctrl+q
export=ctrl+s
find_items=f3
help=f1
import=ctrl+i
item-menu=shift+f10
move_down=ctrl+down
move_to_bottom=ctrl+end
move_to_clipboard=
move_to_top=ctrl+home
move_up=ctrl+up
new=ctrl+n
new_tab=ctrl+t
next_tab=right
paste_selected_items=ctrl+v
preferences=ctrl+p
previous_tab=left
process_manager=ctrl+shift+z
remove_tab=ctrl+w
rename_tab=ctrl+f2
reverse_selected_items=ctrl+shift+r
show-log=f12
show_clipboard_content=ctrl+shift+c
show_item_content=f4
show_item_preview=f7
sort_selected_items=ctrl+shift+s
system-run=f5
toggle_clipboard_storing=ctrl+shift+x
[Tabs]
1\icon=
1\max_item_count=0
1\name=&clipboard
1\store_items=true
size=1
[Theme]
alt_bg=bg-#101a1a
alt_item_css="\n ;border: 0px solid transparent\n ;border-radius: 5px\n "
bg=#ffffff
css=ClipboardBrowser::selected:item{outline:0px}
css_template_items=items
css_template_main_window=main_window
css_template_menu=menu
css_template_notification=notification
cur_item_css="\n ;border: 0.1em solid ${sel_bg}"
edit_bg=#ffffff
edit_fg=#1a1a1a
edit_font="Serif,9,-1,5,50,0,0,0,0,0"
fg=#515151
find_bg=sel_bg
find_fg=#fff
find_font="Serif,9,-1,5,50,0,1,0,0,0"
font="Serif,9,-1,5,50,0,0,0,0,0"
font_antialiasing=true
hover_item_css=
icon_size=16
item_css=
item_spacing=
menu_bar_css="\n ;background: ${bg}\n ;color: ${fg}"
menu_bar_disabled_css="\n ;color: ${bg - #666}"
menu_bar_selected_css="\n ;background: ${sel_bg}\n ;color: ${sel_fg}"
menu_css="\n ;border: 1px solid ${sel_bg}\n ;background: ${bg}\n ;color: ${fg}"
notes_bg=#610001
notes_css=
notes_fg=#ffffff
notes_font="Serif,10,-1,5,50,0,0,0,0,0"
notification_bg=#333
notification_fg=#ddd
notification_font=
num_fg=#a00028
num_font="Ubuntu,7,-1,5,25,0,0,0,0,0"
num_margin=2
num_sel_fg=
search_bar="\n ;background: ${edit_bg}\n ;color: ${edit_fg}\n ;border: 1px solid ${alt_bg}\n ;margin: 2px"
search_bar_focused="\n ;border: 1px solid ${sel_bg}"
sel_bg=#a04
sel_fg=#fff
sel_item_css="\n ;background: qlineargradient(\n x1: 0, y1: 0,\n x2: 0, y2: 1,\n stop: 0 ${sel_bg},\n stop: 1 ${sel_bg - #444}\n )\n ;border: 1px solid #000\n ;border-radius: 5px\n "
show_number=true
show_scrollbars=false
style_main_window=false
tab_bar_css="\n ;background: ${bg - #222}"
tab_bar_item_counter="\n ;color: ${fg - #044 + #400}\n ;font-size: 6pt"
tab_bar_scroll_buttons_css="\n ;background: ${bg - #222}\n ;color: ${fg}\n ;border: 0"
tab_bar_sel_item_counter="\n ;color: ${sel_bg - #044 + #400}"
tab_bar_tab_selected_css="\n ;padding: 0.5em\n ;background: ${bg}\n ;border: 0.05em solid ${bg}\n ;color: ${fg}"
tab_bar_tab_unselected_css="\n ;border: 0.05em solid ${bg}\n ;padding: 0.5em\n ;background: ${bg - #222}\n ;color: ${fg - #333}"
tab_tree_css="\n ;color: ${fg}\n ;background-color: ${bg}"
tab_tree_item_counter="\n ;color: ${fg - #044 + #400}\n ;font-size: 6pt"
tab_tree_sel_item_counter="\n ;color: ${sel_fg - #044 + #400}"
tab_tree_sel_item_css="\n ;color: ${sel_fg}\n ;background-color: ${sel_bg}\n ;border-radius: 2px"
tool_bar_css="\n ;color: ${fg}\n ;background-color: ${bg}\n ;border: 0"
tool_button_css="\n ;color: ${fg}\n ;background: ${bg}\n ;border: 0\n ;border-radius: 2px"
tool_button_pressed_css="\n ;background: ${sel_bg}"
tool_button_selected_css="\n ;background: ${sel_bg - #222}\n ;color: ${sel_fg}\n ;border: 1px solid ${sel_bg}"
use_system_icons=false

10
cowsay/quotes.txt Normal file
View File

@@ -0,0 +1,10 @@
Щас бы пучок
Хохлы это плохо
А ты выключил утюг?
Хорошо сидеть дома
Интересно, какой кумкват на вкус
Когда это всё уже закончится...
Зато не как у виндозников
Когда ты уже пойдешь к психиатру?
Щас бы сериальчик
Высыпаться очень важно

4
cowsay/random.sh Executable file
View File

@@ -0,0 +1,4 @@
#!/bin/bash
# Cowsay a random line from ./quotes.txt
cowsay $(shuf -n 1 ~/.config/cowsay/quotes.txt)

488
dunst/dunstrc Normal file
View File

@@ -0,0 +1,488 @@
# See dunst(5) for all configuration options
[global]
### Display ###
# Which monitor should the notifications be displayed on.
monitor = 0
# Display notification on focused monitor. Possible modes are:
# mouse: follow mouse pointer
# keyboard: follow window with keyboard focus
# none: don't follow anything
#
# "keyboard" needs a window manager that exports the
# _NET_ACTIVE_WINDOW property.
# This should be the case for almost all modern window managers.
#
# If this option is set to mouse or keyboard, the monitor option
# will be ignored.
follow = none
### Geometry ###
# dynamic width from 0 to 300
# width = (0, 300)
# constant width of 300
width = 300
# The maximum height of a single notification, excluding the frame.
height = 300
# Position the notification in the top right corner
origin = top-right
# Offset from the origin
offset = 10x32
# Scale factor. It is auto-detected if value is 0.
scale = 0
# Maximum number of notification (0 means no limit)
notification_limit = 20
### Progress bar ###
# Turn on the progress bar. It appears when a progress hint is passed with
# for example dunstify -h int:value:12
progress_bar = true
# Set the progress bar height. This includes the frame, so make sure
# it's at least twice as big as the frame width.
progress_bar_height = 10
# Set the frame width of the progress bar
progress_bar_frame_width = 1
# Set the minimum width for the progress bar
progress_bar_min_width = 150
# Set the maximum width for the progress bar
progress_bar_max_width = 300
# Corner radius for the progress bar. 0 disables rounded corners.
progress_bar_corner_radius = 0
# Define which corners to round when drawing the progress bar. If progress_bar_corner_radius
# is set to 0 this option will be ignored.
progress_bar_corners = all
# Corner radius for the icon image.
icon_corner_radius = 10
# Define which corners to round when drawing the icon image. If icon_corner_radius
# is set to 0 this option will be ignored.
icon_corners = all
# Show how many messages are currently hidden (because of
# notification_limit).
indicate_hidden = yes
# The transparency of the window. Range: [0; 100].
# This option will only work if a compositing window manager is
# present (e.g. xcompmgr, compiz, etc.). (X11 only)
transparency = 0
# Draw a line of "separator_height" pixel height between two
# notifications.
# Set to 0 to disable.
# If gap_size is greater than 0, this setting will be ignored.
separator_height = 2
# Padding between text and separator.
padding = 8
# Horizontal padding.
horizontal_padding = 8
# Padding between text and icon.
text_icon_padding = 0
# Defines width in pixels of frame around the notification window.
# Set to 0 to disable.
frame_width = 2
# Defines color of the frame around the notification window.
frame_color = "#027c9b"
# Size of gap to display between notifications - requires a compositor.
# If value is greater than 0, separator_height will be ignored and a border
# of size frame_width will be drawn around each notification instead.
# Click events on gaps do not currently propagate to applications below.
gap_size = 0
# Define a color for the separator.
# possible values are:
# * auto: dunst tries to find a color fitting to the background;
# * foreground: use the same color as the foreground;
# * frame: use the same color as the frame;
# * anything else will be interpreted as a X color.
separator_color = frame
# Sort type.
# possible values are:
# * id: sort by id
# * urgency_ascending: sort by urgency (low then normal then critical)
# * urgency_descending: sort by urgency (critical then normal then low)
# * update: sort by update (most recent always at the top)
sort = yes
# Don't remove messages, if the user is idle (no mouse or keyboard input)
# for longer than idle_threshold seconds.
# Set to 0 to disable.
# A client can set the 'transient' hint to bypass this. See the rules
# section for how to disable this if necessary
# idle_threshold = 120
### Text ###
font = Monospace 8
# The spacing between lines. If the height is smaller than the
# font height, it will get raised to the font height.
line_height = 0
# Possible values are:
# full: Allow a small subset of html markup in notifications:
# <b>bold</b>
# <i>italic</i>
# <s>strikethrough</s>
# <u>underline</u>
#
# For a complete reference see
# <https://docs.gtk.org/Pango/pango_markup.html>.
#
# strip: This setting is provided for compatibility with some broken
# clients that send markup even though it's not enabled on the
# server. Dunst will try to strip the markup but the parsing is
# simplistic so using this option outside of matching rules for
# specific applications *IS GREATLY DISCOURAGED*.
#
# no: Disable markup parsing, incoming notifications will be treated as
# plain text. Dunst will not advertise that it has the body-markup
# capability if this is set as a global setting.
#
# It's important to note that markup inside the format option will be parsed
# regardless of what this is set to.
markup = full
# The format of the message. Possible variables are:
# %a appname
# %s summary
# %b body
# %i iconname (including its path)
# %I iconname (without its path)
# %p progress value if set ([ 0%] to [100%]) or nothing
# %n progress value if set without any extra characters
# %% Literal %
# Markup is allowed
format = "<b>%s</b>\n%b"
# Alignment of message text.
# Possible values are "left", "center" and "right".
alignment = left
# Vertical alignment of message text and icon.
# Possible values are "top", "center" and "bottom".
vertical_alignment = center
# Show age of message if message is older than show_age_threshold
# seconds.
# Set to -1 to disable.
show_age_threshold = 60
# Specify where to make an ellipsis in long lines.
# Possible values are "start", "middle" and "end".
ellipsize = middle
# Ignore newlines '\n' in notifications.
ignore_newline = no
# Stack together notifications with the same content
stack_duplicates = true
# Hide the count of stacked notifications with the same content
hide_duplicate_count = false
# Display indicators for URLs (U) and actions (A).
show_indicators = yes
### Icons ###
# Recursive icon lookup. You can set a single theme, instead of having to
# define all lookup paths.
enable_recursive_icon_lookup = true
# Set icon theme (only used for recursive icon lookup)
icon_theme = Adwaita
# You can also set multiple icon themes, with the leftmost one being used first.
# icon_theme = "Adwaita, breeze"
# Align icons left/right/top/off
icon_position = left
# Scale small icons up to this size, set to 0 to disable. Helpful
# for e.g. small files or high-dpi screens. In case of conflict,
# max_icon_size takes precedence over this.
min_icon_size = 32
# Scale larger icons down to this size, set to 0 to disable
max_icon_size = 48
# Paths to default icons (only necessary when not using recursive icon lookup)
icon_path = /usr/share/icons/gnome/16x16/status/:/usr/share/icons/gnome/16x16/devices/
### History ###
# Should a notification popped up from history be sticky or timeout
# as if it would normally do.
sticky_history = yes
# Maximum amount of notifications kept in history
history_length = 20
### Misc/Advanced ###
# dmenu path.
dmenu = /usr/bin/dmenu -p dunst:
# Browser for opening urls in context menu.
browser = /usr/bin/xdg-open
# Always run rule-defined scripts, even if the notification is suppressed
always_run_script = true
# Define the title of the windows spawned by dunst (X11 only)
title = Dunst
# Define the class of the windows spawned by dunst (X11 only)
class = Dunst
# Define the corner radius of the notification window
# in pixel size. If the radius is 0, you have no rounded
# corners.
# The radius will be automatically lowered if it exceeds half of the
# notification height to avoid clipping text and/or icons.
corner_radius = 15
# Define which corners to round when drawing the window. If the corner radius
# is set to 0 this option will be ignored.
#
# Comma-separated list of the corners. The accepted corner values are bottom-right,
# bottom-left, top-right, top-left, top, bottom, left, right or all.
corners = all
# Ignore the dbus closeNotification message.
# Useful to enforce the timeout set by dunst configuration. Without this
# parameter, an application may close the notification sent before the
# user defined timeout.
ignore_dbusclose = false
### Wayland ###
# These settings are Wayland-specific. They have no effect when using X11
# Uncomment this if you want to let notifications appear under fullscreen
# applications (default: overlay)
# layer = top
# Set this to true to use X11 output on Wayland.
force_xwayland = false
### Legacy
# Use the Xinerama extension instead of RandR for multi-monitor support.
# This setting is provided for compatibility with older nVidia drivers that
# do not support RandR and using it on systems that support RandR is highly
# discouraged.
#
# By enabling this setting dunst will not be able to detect when a monitor
# is connected or disconnected which might break follow mode if the screen
# layout changes.
force_xinerama = false
### mouse
# Defines list of actions for each mouse event
# Possible values are:
# * none: Don't do anything.
# * do_action: Invoke the action determined by the action_name rule. If there is no
# such action, open the context menu.
# * open_url: If the notification has exactly one url, open it. If there are multiple
# ones, open the context menu.
# * close_current: Close current notification.
# * close_all: Close all notifications.
# * context: Open context menu for the notification.
# * context_all: Open context menu for all notifications.
# These values can be strung together for each mouse event, and
# will be executed in sequence.
mouse_left_click = close_current
mouse_middle_click = do_action, close_current
mouse_right_click = close_all
# Experimental features that may or may not work correctly. Do not expect them
# to have a consistent behaviour across releases.
[experimental]
# Calculate the dpi to use on a per-monitor basis.
# If this setting is enabled the Xft.dpi value will be ignored and instead
# dunst will attempt to calculate an appropriate dpi value for each monitor
# using the resolution and physical size. This might be useful in setups
# where there are multiple screens with very different dpi values.
per_monitor_dpi = false
[urgency_low]
# IMPORTANT: colors have to be defined in quotation marks.
# Otherwise the "#" and following would be interpreted as a comment.
background = "#222222aa"
foreground = "#ffffff"
timeout = 3
# Icon for notifications with low urgency, uncomment to enable
default_icon = ~/.icons/buuf3.46/128x128/media-information.png
[urgency_normal]
background = "#222222aa"
foreground = "#ffffff"
timeout = 5
override_pause_level = 30
# Icon for notifications with normal urgency, uncomment to enable
default_icon = ~/.icons/buuf3.46/miscellaneous/128x128/status/gtk-info.png
[urgency_critical]
background = "#222222aa"
foreground = "#ffffff"
frame_color = "#ff0000"
background =
timeout = 0
override_pause_level = 60
# Icon for notifications with critical urgency, uncomment to enable
default_icon = ~/.icons/buuf3.46/miscellaneous/128x128/apps/gnome-warning.png
# Every section that isn't one of the above is interpreted as a rules to
# override settings for certain messages.
#
# Messages can be matched by
# appname (discouraged, see desktop_entry)
# body
# category
# desktop_entry
# icon
# match_transient
# msg_urgency
# stack_tag
# summary
#
# and you can override the
# background
# foreground
# format
# frame_color
# fullscreen
# new_icon
# set_stack_tag
# set_transient
# set_category
# timeout
# urgency
# icon_position
# skip_display
# history_ignore
# action_name
# word_wrap
# ellipsize
# alignment
# hide_text
# override_pause_level
#
# Shell-like globbing will get expanded.
#
# Instead of the appname filter, it's recommended to use the desktop_entry filter.
# GLib based applications export their desktop-entry name. In comparison to the appname,
# the desktop-entry won't get localized.
#
# You can also allow a notification to appear even when paused. Notification will appear whenever notification's override_pause_level >= dunst's paused level.
# This can be used to set partial pause modes, where more urgent notifications get through, but less urgent stay paused. To do that, you can override the following in the rules:
# override_pause_level = X
# SCRIPTING
# You can specify a script that gets run when the rule matches by
# setting the "script" option.
# The script will be called as follows:
# script appname summary body icon urgency
# where urgency can be "LOW", "NORMAL" or "CRITICAL".
#
# NOTE: It might be helpful to run dunst -print in a terminal in order
# to find fitting options for rules.
# Disable the transient hint so that idle_threshold cannot be bypassed from the
# client
#[transient_disable]
# match_transient = yes
# set_transient = no
#
# Make the handling of transient notifications more strict by making them not
# be placed in history.
#[transient_history_ignore]
# match_transient = yes
# history_ignore = yes
# fullscreen values
# show: show the notifications, regardless if there is a fullscreen window opened
# delay: displays the new notification, if there is no fullscreen window active
# If the notification is already drawn, it won't get undrawn.
# pushback: same as delay, but when switching into fullscreen, the notification will get
# withdrawn from screen again and will get delayed like a new notification
#[fullscreen_delay_everything]
# fullscreen = delay
#[fullscreen_show_critical]
# msg_urgency = critical
# fullscreen = show
#[espeak]
# summary = "*"
# script = dunst_espeak.sh
#[script-test]
# summary = "*script*"
# script = dunst_test.sh
#[ignore]
# # This notification will not be displayed
# summary = "foobar"
# skip_display = true
#[history-ignore]
# # This notification will not be saved in history
# summary = "foobar"
# history_ignore = yes
#[skip-display]
# # This notification will not be displayed, but will be included in the history
# summary = "foobar"
# skip_display = yes
#[signed_on]
# appname = Pidgin
# summary = "*signed on*"
# urgency = low
#
#[signed_off]
# appname = Pidgin
# summary = *signed off*
# urgency = low
#
#[says]
# appname = Pidgin
# summary = *says*
# urgency = critical
#
#[twitter]
# appname = Pidgin
# summary = *twitter.com*
# urgency = normal
#
#[stack-volumes]
# appname = "some_volume_notifiers"
# set_stack_tag = "volume"
#
# vim: ft=cfg

5
eww/backup/README.md Normal file
View File

@@ -0,0 +1,5 @@
# "Activate Linux"
"Activate Linux" text for [Eww](https://github.com/elkowar/eww/)
![Activate Linux](activate-linux.png)

BIN
eww/backup/activate-linux.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 167 KiB

BIN
eww/backup/backup/activate-linux.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 167 KiB

9
eww/backup/eww.scss Normal file
View File

@@ -0,0 +1,9 @@
.activate-linux {
color: rgba(150, 150, 150, 0.75);
font-size:26px;
font-family: "Segoe UI";
&.background {
background: none;
}
}

13
eww/backup/eww.yuck Normal file
View File

@@ -0,0 +1,13 @@
(defwidget activate-linux []
(box
:orientation "v"
:halign "start"
:valign "start"
(label :xalign 0 :markup "<span font_size=\"large\">Activate Linux</span>")
(label :xalign 0 :text "Go to Settings to activate Linux")))
(defwindow activate-linux
:monitor 1
:stacking "fg"
:geometry (geometry :x "-40px" :y "-75px" :width "400px" :anchor "bottom right")
(activate-linux))

674
eww/backup/gross/LICENSE Normal file
View File

@@ -0,0 +1,674 @@
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The GNU General Public License is a free, copyleft license for
software and other kinds of works.
The licenses for most software and other practical works are designed
to take away your freedom to share and change the works. By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users. We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors. You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.
To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights. Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received. You must make sure that they, too, receive
or can get the source code. And you must show them these terms so they
know their rights.
Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.
For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software. For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.
Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so. This is fundamentally incompatible with the aim of
protecting users' freedom to change the software. The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable. Therefore, we
have designed this version of the GPL to prohibit the practice for those
products. If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.
Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary. To prevent this, the GPL assures that
patents cannot be used to render the program non-free.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS
0. Definitions.
"This License" refers to version 3 of the GNU General Public License.
"Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.
"The Program" refers to any copyrightable work licensed under this
License. Each licensee is addressed as "you". "Licensees" and
"recipients" may be individuals or organizations.
To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy. The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.
A "covered work" means either the unmodified Program or a work based
on the Program.
To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy. Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.
To "convey" a work means any kind of propagation that enables other
parties to make or receive copies. Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License. If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.
1. Source Code.
The "source code" for a work means the preferred form of the work
for making modifications to it. "Object code" means any non-source
form of a work.
A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.
The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form. A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.
The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities. However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work. For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.
The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.
The Corresponding Source for a work in source code form is that
same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met. This License explicitly affirms your unlimited
permission to run the unmodified Program. The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work. This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force. You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright. Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under
the conditions stated below. Sublicensing is not allowed; section 10
makes it unnecessary.
3. Protecting Users' Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.
When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified
it, and giving a relevant date.
b) The work must carry prominent notices stating that it is
released under this License and any conditions added under section
7. This requirement modifies the requirement in section 4 to
"keep intact all notices".
c) You must license the entire work, as a whole, under this
License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section 7
additional terms, to the whole of the work, and all its parts,
regardless of how they are packaged. This License gives no
permission to license the work in any other way, but it does not
invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must display
Appropriate Legal Notices; however, if the Program has interactive
interfaces that do not display Appropriate Legal Notices, your
work need not make them do so.
A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit. Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:
a) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by the
Corresponding Source fixed on a durable physical medium
customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by a
written offer, valid for at least three years and valid for as
long as you offer spare parts or customer support for that product
model, to give anyone who possesses the object code either (1) a
copy of the Corresponding Source for all the software in the
product that is covered by this License, on a durable physical
medium customarily used for software interchange, for a price no
more than your reasonable cost of physically performing this
conveying of source, or (2) access to copy the
Corresponding Source from a network server at no charge.
c) Convey individual copies of the object code with a copy of the
written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially, and
only if you received the object code with such an offer, in accord
with subsection 6b.
d) Convey the object code by offering access from a designated
place (gratis or for a charge), and offer equivalent access to the
Corresponding Source in the same way through the same place at no
further charge. You need not require recipients to copy the
Corresponding Source along with the object code. If the place to
copy the object code is a network server, the Corresponding Source
may be on a different server (operated by you or a third party)
that supports equivalent copying facilities, provided you maintain
clear directions next to the object code saying where to find the
Corresponding Source. Regardless of what server hosts the
Corresponding Source, you remain obligated to ensure that it is
available for as long as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided
you inform other peers where the object code and Corresponding
Source of the work are being offered to the general public at no
charge under subsection 6d.
A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.
A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling. In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage. For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product. A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.
"Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source. The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.
If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information. But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).
The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed. Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.
7. Additional Terms.
"Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law. If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.
When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it. (Additional permissions may be written to require their own
removal in certain cases when you modify the work.) You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the
terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices or
author attributions in that material or in the Appropriate Legal
Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material, or
requiring that modified versions of such material be marked in
reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors or
authors of the material; or
e) Declining to grant rights under trademark law for use of some
trade names, trademarks, or service marks; or
f) Requiring indemnification of licensors and authors of that
material by anyone who conveys the material (or modified versions of
it) with contractual assumptions of liability to the recipient, for
any liability that these contractual assumptions directly impose on
those licensors and authors.
All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10. If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term. If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly
provided under this License. Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).
However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.
Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License. If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or
run a copy of the Program. Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance. However,
nothing other than this License grants you permission to propagate or
modify any covered work. These actions infringe copyright if you do
not accept this License. Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License. You are not responsible
for enforcing compliance by third parties with this License.
An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations. If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License. For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based. The
work thus licensed is called the contributor's "contributor version".
A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version. For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.
In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement). To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.
If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients. "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.
A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License. You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all. For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.
13. Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work. The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation. If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.
If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.
Later license versions may give you additional or different
permissions. However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
Also add information on how to contact you by electronic and paper mail.
If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:
<program> Copyright (C) <year> <name of author>
This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".
You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<https://www.gnu.org/licenses/>.
The GNU General Public License does not permit incorporating your program
into proprietary programs. If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License. But first, please read
<https://www.gnu.org/licenses/why-not-lgpl.html>.

30
eww/backup/gross/README.md Normal file
View File

@@ -0,0 +1,30 @@
# gross 🤢
A Collection of my [eww](https://www.github.com/elkowar/eww/) configurations using YUCK!
## Showcase 📷
![gross_showcase](https://user-images.githubusercontent.com/57213270/140309158-e65cbc1d-f3a8-4aec-848c-eef800de3364.png)
## Contents 🖼
- Dropdown Widget (works in conjunction with polybar)
- Rofi-like search widget (searches in /usr/bin/)
- Powermenu
## Directory Structure 📁
```bash
~/.config/eww/
├── eww.scss
├── eww_variables.yuck
├── eww_widgets.yuck
├── eww_windows.yuck
├── eww.yuck
└── scripts
├── search_items.txt
└── search.sh
1 directory, 7 files
```
## TODO
- [ ] Bar
- [x] Music Player

8
eww/backup/gross/eww/README.md Normal file
View File

@@ -0,0 +1,8 @@
# Eww config file structure
```bash
eww.yuck -> calls eww_windows
eww_windows.yuck -> calls widgets, defines all windows
eww_widgets.yuck -> calls eww_variables, defines all widgets
eww_variables.yuck -> defines all variabes
scripts/ -> contains all scripts used by variables/buttons/others
```

128
eww/backup/gross/eww/eww.scss Normal file
View File

@@ -0,0 +1,128 @@
* {
all: unset;
font-family: "JetBrains Mono";
}
// WINDOW RELATED CSS
.bg {
background-color: #1E222A;
border: 2px solid #80A0C0;
}
.notes {
padding: 10px 20px 10px 5px;
}
window {
background: #2e3440;
color: #ebcb8b;
//border-radius: 2rem;
border: 3px solid #80A0C0;
}
// MISC EDITING
.uinfo {
font-size: 1.25rem;
}
.cpu {
padding: 19px;
}
// METRIC LOOKS
.metric scale trough highlight {
all: unset;
color: #000000;
background: linear-gradient(90deg, #88c0d0 0%, #81a1c1 50%, #5E81ac 100%);
//border-radius: 10px;
}
.metric scale trough {
all: unset;
background-color: #545454;
//border-radius: 50px;
min-height: 10px;
min-width: 100px;
margin-left: 10px;
margin-right: 5px;
}
.metric .label {
color: #B48EAD;
font-size: 1.5rem;
}
// POWERMENU
.bigpowermenu {
font-size: 3rem;
}
.quicksettings {
font-size: 1.75rem;
}
// WIDGET MISC SETTINGS
.quote-text {
padding: 5px;
font-size: 1rem;
font-style: italic;
font-weight: 600;
color: #BF616A;
}
.appbar{
font-size: 2rem;
}
.cal {
color: #8fbcbb;
padding: 5px;
padding-bottom: 1px;
}
.favs {
color: #ECEFF4;
font-size: 2rem;
}
.small-date {
font-weight: 700;
}
// Search App CSS
.searchapps-bar {
color: #88c0d0;
font-size: 1.5rem;
margin: -2px;
padding: 30px 90px 30px 90px;
background-color: #1E222A;
border: 6px solid #80A0C0;
}
.search-bar {
color: #88c0d0;
}
.search-label {
font-family: "Iosevka";
font-size: 2rem;
font-weight: 700;
padding-right: 20px;
}
.app-container {
margin: -2px;
font-size: 1.25rem;
padding: 30px;
color: #88c0d0;
}
.item {
padding: 10px;
background: rgba(10,10,10,0.4);
}
.label-control {
color: #81a1c1;
font-size: 1.5rem;
padding: 15px;
}
.controls {
font-size: 2rem;
padding-bottom: 20px;
}

2
eww/backup/gross/eww/eww.yuck Normal file
View File

@@ -0,0 +1,2 @@
;;;; Including Window script, which calls everyone else
(include "eww_windows.yuck")

22
eww/backup/gross/eww/eww_variables.yuck Normal file
View File

@@ -0,0 +1,22 @@
;;;; QUOTE
(defpoll quote_text :interval "3600s" `fortune -n 90 -s`)
;;;; FETCH AND DATE
(defpoll TODAY :interval "1s" `date +%m/%d/%y`)
(defpoll distro :interval "12h" "awk '/^ID=/' /etc/*-release | awk -F'=' '{ print tolower($2) }'")
(defpoll de :interval "12h" "echo $XDG_CURRENT_DESKTOP")
(defpoll wm :interval "12h" "wmctrl -m | grep \"Name:\" | awk '{print $2}'")
(defpoll shell :interval "5m" "echo $SHELL | awk -F'/' '{print $NF}'")
(defpoll uptime :interval "30s" "uptime -p | sed -e 's/up //;s/ hours,/h/;s/ minutes/m/'")
(defpoll packages :interval "5m" "pacman -Q | wc -l")
;;;; NOTES, MUSIC, NETWORKING
(defpoll NOTES :interval "1s" "cat -s ~/Documents/notes.txt")
(defpoll music_current :interval "1s" "mpc current")
(defpoll ssid :interval "1s" "iwgetid -r || echo 'Disconnected'")
;;;; App list LISTEN VAR
(defpoll search_listen :interval "1s" "cat ~/.config/eww/scripts/search_items.txt")

146
eww/backup/gross/eww/eww_widgets.yuck Normal file
View File

@@ -0,0 +1,146 @@
; -> WIDGETS FOR EWW <- ;
;;;; Imports
(include "eww_variables.yuck")
;;;; Metric (cpu, ram, etc bars) constructor widget
(defwidget metric [label value onchange]
(box :orientation "h" :class "metric" :space-evenly false
(box :class "label" label)
(scale :min 0 :max 101 :active {onchange != ""} :value value :onchange onchange)))
;;;; Background Black Holder Widget
(defwidget bg []
(box :class "bg-box" :orientation "v" :space-evenly false))
;;;; Favorite App Locations
(defwidget favorites[]
(box :class "favs" :orientation "v" :space-evenly false :halign "center" :valign "center"
(button :onclick "pcmanfm ~ &" "")
(button :onclick "pcmanfm ~/.config/ &" "漣")
(button :onclick "pcmanfm ~/Downloads &" "")
(button :onclick "pcmanfm ~/Pictures &" "")))
;;;; Big Calendar Widget
(defwidget cal []
(calendar :halign "center" :valign "center" :class "cal" :month 10 :year 2021))
;;;; Small date in mm/dd/yy format
(defwidget smalldate []
(label :class "small-date" :valign "center" :halign "center" :text TODAY))
;;;; User information fetch widget
(defwidget uinfo []
(box :class "uinfo" :orientation "v" :space-evenly false :halign "center" :valign "center"
(label :style "color: #5e81ac;" :text "sparsh@asus-sea" :halign "center" :valign "center" :wrap "false" :limit-width 25)
(label :style "color: #efefef;" :text "⎯⎯⎯⎯⎯⎯⎯⎯" :halign "center" :valign "center" :wrap "false" :limit-width 25)
;; Tags for values
(box :orientation "h" :space-evenly "false" :spacing 10
(box :orientation "v" :class "fetch" :spacing 2
(label :style "font-family: 'archcraft'; color: #b48ead;" :halign "end" :text "")
(label :style "color: #ebcb8b;" :halign "end" :text "缾")
(label :style "color: #80a0c0;" :halign "end" :text "")
(label :style "color: #b48ead;" :halign "end" :text "")
(button :style "color: #88c0d0;" :halign "end" :onclick "alacritty --class 'alacritty-float,alacritty-float' -e yay -Syu &" ""))
;; Fetch Values
(box :orientation "v" :class "fetch"
(label :style "color: #b48ead;" :halign "start" :text ": ${distro}")
(label :style "color: #ebcb8b;" :halign "start" :text ": ${wm}")
(label :style "color: #80a0c0;" :halign "start" :text ": ${shell}")
(label :style "color: #b48ead;" :halign "start" :text ": ${uptime}")
(button :style "color: #88c0d0;" :halign "start" :onclick "alacritty --class 'alacritty-float,alacritty-float' -e yay -Syu &" ": ${packages}")))))
;;;; System Information Widget
(defwidget sys[]
(box :class "cpu" :orientation "v" :space-evenly false :halign "center" :valign "center"
(metric :label "﬙" :value {EWW_CPU.avg} :onchange "")
(metric :label "" :value {EWW_RAM.used_mem_perc} :onchange "")
(metric :label "龍" :value {(EWW_NET.wlan0.NET_UP)/100} :onchange "")
(metric :label "" :value {(EWW_DISK["/"].free / EWW_DISK["/"].total) * 100} :onchange "")))
;;;; Random Quote Widget
(defwidget quote[]
(box :class "quote" :orientation "v" :space-evenly false :halign "center" :valign "center"
(label :class "quote-text" :text "${quote_text}" :wrap true)))
;;;; QuickSettings widget
(defwidget quicksettings []
(box :orientation "h" :space-evenly true :class "quicksettings" :spacing "10" :halign "center" :valign "center"
(button :style "color: #5e81ac;" :onclick "mpv --demuxer-lavf-format=video4linux2 --demuxer-lavf-o-set=input_format=mjpeg av://v4l2:/dev/video0 &" (image :path "images/camera-web.svg" :width 32 :height 32))
(button :style "color: #81a1c1; padding-left: 3px;" :onclick "pavucontrol &" (image :path "images/audio-headphones.svg" :width 32 :height 32))
(button :style "color: #b48ead;" :onclick "sh ~/.config/eww/scripts/airplane_mode.sh &" (image :path "images/network-card.svg" :width 32 :height 32))))
;;;; AppBar widget
(defwidget appbar []
(box :orientation "h" :space-evenly true :class "appbar" :spacing "5" :halign "center" :valign "center"
(button :style "color: #5e81ac;" :onclick "krita&" (image :path "images/krita.svg" :width 32 :height 32))
(button :style "color: #81a1c1;" :onclick "firefox&" (image :path "images/firefox.svg" :width 32 :height 32))
(button :style "color: #b48ead;" :onclick "vscodium&" (image :path "images/vscode.svg" :width 32 :height 32))
(button :style "color: #bf616a;" :onclick "gimp&" (image :path "images/gimp.svg" :width 32 :height 32))))
;;;; TODO Notes Displaying widget
(defwidget notes []
(box :spacing 5 :class "notes" :orientation "v" :space-evenly false :halign "center" :valign "center"
(label :style "color: #5e81ac;" :text NOTES :halign "center" :valign "center" :wrap true :limit-width 150 :vexpand false :hexpand false)
(box :orientation "h"
(button :onclick "echo '' > ~/Documents/notes.txt" "[ Empty ]")
(button :onclick "pcmanfm ~/Documents/notes.txt" "[ Edit TODO ]"))))
;;;; Rofi style search
(defwidget searchapps []
(eventbox :onhoverlost "eww close searchapps"
(box :orientation "v" :space-evenly false :class "search-win" :halign "top" :valign "top"
(box :orientation "h" :space-evenly false :class "searchapps-bar" :halign "top" :valign "top"
(label :class "search-label" :text "")
(input :class "search-bar" :onchange "~/.config/eww/scripts/search.sh {}"))
(literal :halign "center" :valign "center" :class "app-container" :content search_listen))))
;;;; Rofi style powermenu
(defwidget bigpowermenu []
(box :orientation "h" :space-evenly false :class "bigpowermenu" :halign "center" :valign "center" :spacing 20
(button :style "color: #d8dee9;" :class "shutdown" :onrightclick "systemctl poweroff" "")
(button :style "color: #e5e9f0;" :class "reboot" :onrightclick "systemctl reboot" "")
(button :style "color: #eceff4;" :class "lock" :onrightclick "bsplock" "")
(button :style "color: #e8e8e8;" :class "suspend" :onrightclick "mpc -q pause & amixer set Master mute & systemctl suspend" "")
(button :style "color: #ffffff;" :class "logout" :onrightclick "bspc quit" "")))
;;;; Music Player
(defwidget musicplayer []
(box :orientation "v" :space-evenly false :class "musicplayer" :halign "center" :valign "center" :hexpand true :vexpand true
(label :class "label-control" :text "${music_current}" :halign "center" :limit-width 50 :show-truncated true :hexpand true :vexpand true)
(box :orientation "h" :space-evenly false :class "controls" :halign "center" :valign "center" :spacing 20
(button :style "color: #d8dee9;" :onclick "mpc -q toggle && notify-send -u low -t 1800 ${music_current}" "懶")
(button :style "color: #e5e9f0;" :onclick "mpc -q stop" "")
(button :style "color: #eceff4;" :onclick "mpc -q next && notify-send -u low -t 1800 ${music_current}" "")
(button :style "color: #e8e8e8;" :onclick "mpc -q prev && notify0send -u low -t 1800 ${music_current}" ""))))
(defwidget network []
(box :orientation "v" :space-evenly false :class "network" :halign "center" :valign "center" :hexpand true :vexpand true
(label :class "label-control" :text "${ssid}" :halign "center" :limit-width 50 :show-truncated true :hexpand true :vexpand true)
(box :orientation "h" :space-evenly false :class "controls" :halign "center" :valign "center" :spacing 20
(button :style "color: #d8dee9;" :onclick "sh ~/.config/eww/scripts/airplane_mode.sh" "")
(button :style "color: #e5e9f0;" :onclick "alacritty --class 'alacritty-float,alacritty-float' -e bmon &" "")
(button :style "color: #eceff4;" :onclick "alacritty --class 'alacritty-float,alacritty-float' -e nmtui &" "")
(button :style "color: #e8e8e8;" :onclick "nm-connection-editor &" ""))))
(defwidget screenshot []
(box :orientation "v" :space-evenly false :class "network" :halign "center" :valign "center" :hexpand true :vexpand true
(label :class "label-control" :text " Screenshot" :halign "center" :limit-width 50 :show-truncated true :hexpand true :vexpand true)
(box :orientation "h" :space-evenly false :class "controls" :halign "center" :valign "center" :spacing 20
(button :style "color: #d8dee9;" :onclick "eww close screenshot && ~/.config/eww/scripts/screenshot 'SCREEN'" "")
(button :style "color: #e5e9f0;" :onclick "eww close screenshot && ~/.config/eww/scripts/screenshot 'SELECT'" ""))))

191
eww/backup/gross/eww/eww_windows.yuck Normal file
View File

@@ -0,0 +1,191 @@
; -> WINDOWS FOR EWW WIDGETS <- ;
;;;; IMPORTS
(include "eww_widgets.yuck")
;;;; Fetch widget window
(defwindow fetch
:wm-ignore: true
:monitor 0
:windowtype "dock"
:geometry (geometry :x "20px"
:y "65px"
:width "170px"
:height "200px"
:anchor "top left")
(uinfo))
;;;; System information window
(defwindow sys
:class "cpu-win"
:wm-ignore true
:monitor 0
:windowtype "dock"
:geometry (geometry :x "200px"
:y "275px"
:width "170px"
:height "48px"
:anchor "top left")
(sys))
;;;; Random Quotes
(defwindow quote
:wm-ignore true
:monitor 0
:windowtype "dock"
:geometry (geometry :x "200px"
:y "65px"
:width "170px"
:height "200px"
:anchor "top left")
(quote))
;;;; Quicksettings window
(defwindow quicksettings
:wm-ignore true
:monitor 0
:windowtype "dock"
:geometry (geometry :x "20px"
:y "275px"
:width "170px"
:height "50px"
:anchor "top left")
(quicksettings))
;;;; Favorite applications
(defwindow appbar
:wm-ignore true
:monitor 0
:windowtype "dock"
:geometry (geometry :x "20"
:y "335px"
:width "170px"
:height "70px"
:anchor "top left")
(appbar))
;;;; Big Calendar Window
(defwindow calendar
:wm-ignore: true
:monitor 0
:windowtype "dock"
:geometry (geometry :x "20px"
:y "415px"
:width "240px"
:height "160px"
:anchor "top left")
(cal))
;;;; Favorite Locations Window
(defwindow favorites
:wm-ignore: true
:monitor 0
:windowtype "dock"
:geometry (geometry :x "270px"
:y "415px"
:width "100px"
:height "160px"
:anchor "top left")
(favorites))
;;;; Small date Window
(defwindow smalldate
:wm-ignore: true
:monitor 0
:windowtype "dock"
:geometry (geometry :x "270px"
:y "580px"
:width "100px"
:height "39px"
:anchor "top left")
(smalldate))
;;;; Background Container Window
(defwindow bg
:class "bg"
:wm-ignore true
:monitor 0
:windowtype "dock"
:geometry (geometry :x "5px"
:y "40px"
:width "380px"
:height "800px"
:anchor "top left")
(bg))
;;;; TODO Notes window
(defwindow notes
:wm-ignore: true
:monitor 0
:windowtype "dock"
:geometry (geometry :x "20px"
:y "630px"
:width "350px"
:height "100px"
:anchor "top left")
(notes))
;;;; Searching Windows
(defwindow searchapps
:wm-ignore: true
:monitor 0
:windowtype "normal"
:geometry (geometry :x "40%"
:y "30%"
:width "20%"
:height "50%"
:anchor "top left")
(searchapps))
(defwindow bigpowermenu
:wm-ignore true
:monitor 0
:windowtype "dock"
:geometry (geometry :x "0px"
:y "0%"
:width "20%"
:height "10%"
:anchor "center center")
(bigpowermenu))
(defwindow musicplayer
:wm-ignore true
:monitor 0
:windowtype "dock"
:geometry (geometry :x "0px"
:y "0%"
:width "20%"
:height "10%"
:anchor "center center")
(musicplayer))
(defwindow network
:wm-ignore true
:monitor 0
:windowtype "dock"
:geometry (geometry :x "0px"
:y "0%"
:width "20%"
:height "10%"
:anchor "center center")
(network))
(defwindow screenshot
:wm-ignore true
:monitor 0
:windowtype "dock"
:geometry (geometry :x "0px"
:y "0%"
:width "20%"
:height "10%"
:anchor "center center")
(screenshot))

7
eww/backup/gross/eww/scripts/airplane_mode.sh Normal file
View File

@@ -0,0 +1,7 @@
#!/bin/sh
status=$(nmcli n)
if [[ "$status" == "enabled" ]]; then
nmcli n off
else
nmcli n on
fi

41
eww/backup/gross/eww/scripts/screenshot Normal file
View File

@@ -0,0 +1,41 @@
#!/usr/bin/env bash
time=`date +%Y-%m-%d-%I-%M-%S`
geometry=`xrandr | head -n1 | cut -d',' -f2 | tr -d '[:blank:],current'`
dir="`xdg-user-dir PICTURES`/Screenshots"
file="Screenshot_${time}_${geometry}.png"
# notify
notify_user () {
if [[ -e "$dir/$file" ]]; then
dunstify -u low --replace=699 -i /usr/share/archcraft/icons/dunst/picture.png "Saved in $dir"
else
dunstify -u low --replace=699 -i /usr/share/archcraft/icons/dunst/picture.png "Screenshot Deleted."
fi
}
# take shots
shotnow () {
cd ${dir} && sleep 0.5 && maim -u -f png "$file" && viewnior ${dir}/"$file"
notify_user
}
shotarea () {
cd ${dir} && maim -u -f png -s -b 2 -c 0.35,0.55,0.85,0.25 -l "$file" && viewnior ${dir}/"$file"
notify_user
}
if [[ ! -d "$dir" ]]; then
mkdir -p "$dir"
fi
chosen="$1"
case $chosen in
"SCREEN")
shotnow
;;
"SELECT")
shotarea
;;
esac

8
eww/backup/gross/eww/scripts/search.sh Normal file
View File

@@ -0,0 +1,8 @@
#!/bin/sh
list=$(ls /usr/bin/ | grep -m 10 -i "$1")
buf=""
for l in $list ; do
buf="$buf (button :class \"item\" :onclick \"$l &\" \"$l\")"
done
echo "(box :orientation \"v\" :spacing 5 :class \"apps\" :halign \"center\" :valign \"center\" $buf)" > ~/.config/eww/scripts/search_items.txt

BIN
eww/eww-bar.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 6.1 KiB

43
eww/eww.scss Normal file
View File

@@ -0,0 +1,43 @@
* {
all: unset; // Unsets everything so you can style everything from scratch
}
// Global Styles
.bar {
background-color: #3a3a3a;
color: #b0b4bc;
padding: 10px;
}
// Styles on classes (see eww.yuck for more information)
.sidestuff slider {
all: unset;
color: #ffd5cd;
}
.metric scale trough highlight {
all: unset;
background-color: #D35D6E;
color: #000000;
border-radius: 10px;
}
.metric scale trough {
all: unset;
background-color: #4e4e4e;
border-radius: 50px;
min-height: 3px;
min-width: 50px;
margin-left: 10px;
margin-right: 20px;
}
.label-ram {
font-size: large;
}
.workspaces button:hover {
color: #D35D6E;
}

75
eww/eww.yuck Normal file
View File

@@ -0,0 +1,75 @@
(defwidget bar []
(centerbox :orientation "h"
(workspaces)
(music)
(sidestuff)))
(defwidget sidestuff []
(box :class "sidestuff" :orientation "h" :space-evenly false :halign "end"
(metric :label "🔊"
:value volume
:onchange "amixer -D pulse sset Master {}%")
(metric :label ""
:value {EWW_RAM.used_mem_perc}
:onchange "")
(metric :label "💾"
:value {round((1 - (EWW_DISK["/"].free / EWW_DISK["/"].total)) * 100, 0)}
:onchange "")
time))
(defwidget workspaces []
(box :class "workspaces"
:orientation "h"
:space-evenly true
:halign "start"
:spacing 10
(button :onclick "wmctrl -s 0" 1)
(button :onclick "wmctrl -s 1" 2)
(button :onclick "wmctrl -s 2" 3)
(button :onclick "wmctrl -s 3" 4)
(button :onclick "wmctrl -s 4" 5)
(button :onclick "wmctrl -s 5" 6)
(button :onclick "wmctrl -s 6" 7)
(button :onclick "wmctrl -s 7" 8)
(button :onclick "wmctrl -s 8" 9)))
(defwidget music []
(box :class "music"
:orientation "h"
:space-evenly false
:halign "center"
{music != "" ? "🎵${music}" : ""}))
(defwidget metric [label value onchange]
(box :orientation "h"
:class "metric"
:space-evenly false
(box :class "label" label)
(scale :min 0
:max 101
:active {onchange != ""}
:value value
:onchange onchange)))
(deflisten music :initial ""
"playerctl --follow metadata --format '{{ artist }} - {{ title }}' || true")
(defpoll volume :interval "1s"
"scripts/getvol")
(defpoll time :interval "10s"
"date '+%H:%M %b %d, %Y'")
(defwindow bar
:monitor 0
:windowtype "dock"
:geometry (geometry :x "0%"
:y "0%"
:width "90%"
:height "10px"
:anchor "top center")
:reserve (struts :side "top" :distance "4%")
(bar))

12
eww/scripts/getvol Executable file
View File

@@ -0,0 +1,12 @@
#!/bin/sh
if command -v pamixer &>/dev/null; then
if [ true == $(pamixer --get-mute) ]; then
echo 0
exit
else
pamixer --get-volume
fi
else
amixer -D pulse sget Master | awk -F '[^0-9]+' '/Left:/{print $3}'
fi

46
fastfetch/New Folder/config.jsonc Normal file
View File

@@ -0,0 +1,46 @@
{
"$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
"logo": {
"height": 8,
"type": "kitty",
"source": "$(ls ~/Pictures/Fetch/Brawlhalla/* | shuf -n 1)"
},
"display": {
"separator": " ",
"color": {
"keys": "magenta"
},
"key": {
"type": "icon"
}
},
"modules": [
"title",
"separator",
{
"type": "os",
"keyIcon": ""
},
{
"type": "kernel",
"keyIcon": ""
},
{
"type": "host",
"keyIcon": ""
},
"wm",
{
"type": "memory",
"keyIcon": "󱤓"
},
{
"type": "colors",
"key": "",
"keyIcon": "",
"block": {
},
"symbol": "circle"
}
]
}

46
fastfetch/brawl.jsonc Normal file
View File

@@ -0,0 +1,46 @@
{
"$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
"logo": {
"height": 8,
"type": "kitty",
"source": "$(ls ~/Pictures/Fetch/Brawlhalla/* | shuf -n 1)"
},
"display": {
"separator": " ",
"color": {
"keys": "magenta"
},
"key": {
"type": "icon"
}
},
"modules": [
"title",
"separator",
{
"type": "os",
"keyIcon": ""
},
{
"type": "kernel",
"keyIcon": ""
},
{
"type": "host",
"keyIcon": ""
},
"wm",
{
"type": "memory",
"keyIcon": "󱤓"
},
{
"type": "colors",
"key": "",
"keyIcon": "",
"block": {
},
"symbol": "circle"
}
]
}

46
fastfetch/brawl_shang.jsonc Normal file
View File

@@ -0,0 +1,46 @@
{
"$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
"logo": {
"height": 8,
"type": "kitty",
"source": "~/Pictures/Fetch/Brawlhalla/wushangranno.png"
},
"display": {
"separator": " ",
"color": {
"keys": "yellow"
},
"key": {
"type": "icon"
}
},
"modules": [
"title",
"separator",
{
"type": "os",
"keyIcon": ""
},
{
"type": "kernel",
"keyIcon": ""
},
{
"type": "host",
"keyIcon": ""
},
"wm",
{
"type": "memory",
"keyIcon": "󱤓"
},
{
"type": "colors",
"key": "",
"keyIcon": "",
"block": {
},
"symbol": "circle"
}
]
}

108
fastfetch/config.jsonc Normal file
View File

@@ -0,0 +1,108 @@
{
"$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
"logo": {
"padding": {
"top": 2
}
},
"modules": [
"title",
"separator",
"os",
"host",
"bios",
"bootmgr",
"board",
"chassis",
"kernel",
"initsystem",
"uptime",
"loadavg",
"processes",
"packages",
"shell",
"editor",
"display",
"brightness",
"monitor",
"lm",
"de",
"wm",
"wmtheme",
"theme",
"icons",
"font",
"cursor",
"wallpaper",
"terminal",
"terminalfont",
"terminalsize",
"terminaltheme",
{
"type": "cpu",
"showPeCoreCount": true,
"temp": true
},
"cpucache",
"cpuusage",
{
"type": "gpu",
"driverSpecific": true,
"temp": true
},
"memory",
"physicalmemory",
"swap",
"disk",
"btrfs",
"zpool",
{
"type": "battery",
"temp": true
},
"poweradapter",
"player",
"media",
{
"type": "publicip",
"timeout": 1000
},
{
"type": "localip",
"showIpv6": true,
"showMac": true,
"showSpeed": true,
"showMtu": true,
"showLoop": true,
"showFlags": true,
"showAllIps": true
},
"dns",
"wifi",
"datetime",
"locale",
"vulkan",
"opengl",
"opencl",
"users",
"bluetooth",
"bluetoothradio",
"sound",
"camera",
"gamepad",
{
"type": "weather",
"timeout": 1000
},
"netio",
"diskio",
{
"type": "physicaldisk",
"temp": true
},
"tpm",
"version",
"break",
"colors"
]
}

24
fastfetch/config.jsonc.old Normal file
View File

@@ -0,0 +1,24 @@
{
"$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
"logo": {
"width": 20,
"type": "kitty",
"source": "$(ls ~/Pictures/Fetch/Brawlhalla/* | shuf -n 1)",
},
"modules": [
"title",
"separator",
"os",
"host",
"kernel",
"uptime",
"wm",
"cpu",
"memory",
"swap",
"disk",
"poweradapter",
"break",
"colors"
]
}

46
fastfetch/oneshot.jsonc Normal file
View File

@@ -0,0 +1,46 @@
{
"$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
"logo": {
"height": 8,
"type": "kitty",
"source": "$(ls ~/Pictures/Fetch/Oneshot/new/* | shuf -n 1)"
},
"display": {
"separator": " ",
"color": {
"keys": "magenta"
},
"key": {
"type": "icon"
}
},
"modules": [
"title",
"separator",
{
"type": "os",
"keyIcon": ""
},
{
"type": "kernel",
"keyIcon": ""
},
{
"type": "host",
"keyIcon": ""
},
"wm",
{
"type": "memory",
"keyIcon": "󱤓"
},
{
"type": "colors",
"key": "",
"keyIcon": "",
"block": {
},
"symbol": "circle"
}
]
}

42
fastfetch/sakura.jsonc Normal file
View File

@@ -0,0 +1,42 @@
{
"$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
"logo": {
"height": 8,
"type": "kitty",
"source": "~/Pictures/Fetch/sakura_pixel.png"
},
"display": {
"separator": " ",
"color": {
"keys": "yellow"
},
"key": {
"type": "icon"
}
},
"modules": [
"title",
"separator",
{
"type": "os",
"keyIcon": ""
},
{
"type": "host",
"keyIcon": ""
},
"wm",
{
"type": "memory",
"keyIcon": "󱤓"
},
{
"type": "colors",
"key": "",
"keyIcon": "",
"block": {
},
"symbol": "circle"
}
]
}

42
fastfetch/sakura_v2.jsonc Normal file
View File

@@ -0,0 +1,42 @@
{
// "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
"logo": {
"height": 8,
"type": "kitty",
"source": "~/Pictures/Fetch/sakura_pixel.png"
},
"display": {
"separator": " ",
"color": {
"keys": "yellow"
},
"key": {
"type": "icon"
}
},
"modules": [
"title",
"separator",
{
"type": "os",
"keyIcon": ""
},
{
"type": "host",
"keyIcon": ""
},
"wm",
{
"type": "memory",
"keyIcon": "󱤓"
},
{
"type": "colors",
"key": "",
"keyIcon": "",
"block": {
},
"symbol": "circle"
}
]
}

2
gamemode.ini Normal file
View File

@@ -0,0 +1,2 @@
[general]
renice=0

3
hypr/grayscale.conf Normal file
View File

@@ -0,0 +1,3 @@
# decoration {
# screen_shader = ~/.config/hypr/grayscale.glsl
# }

9
hypr/grayscale.glsl Normal file
View File

@@ -0,0 +1,9 @@
precision mediump float;
varying vec2 v_texcoord;
uniform sampler2D tex;
void main() {
vec4 this_colour = texture2D( tex, v_texcoord );
float new_colour = (this_colour.r+this_colour.g+this_colour.b)/3.0;
gl_FragColor = vec4(new_colour,new_colour,new_colour,1.0);
}

36
hypr/hypridle.conf Normal file
View File

@@ -0,0 +1,36 @@
general {
lock_cmd = pidof hyprlock || hyprlock # avoid starting multiple hyprlock instances.
before_sleep_cmd = loginctl lock-session # lock before suspend.
after_sleep_cmd = hyprctl dispatch dpms on # to avoid having to press a key twice to turn on the display.
}
listener {
timeout = 180 # 2.5min.
#on-timeout = brightnessctl -s set 10 # set monitor backlight to minimum, avoid 0 on OLED monitor.
on-timeout = touch /tmp/asleepin && /home/greg/.config/hypr/scripts/dimscreen.sh
on-resume = rm /tmp/asleepin && brightnessctl -r
#on-resume = brightnessctl -r # monitor backlight restore.
}
# turn off keyboard backlight, comment out this section if you dont have a keyboard backlight.
listener {
timeout = 190 # 2.5min.
on-timeout = brightnessctl -sd rgb:kbd_backlight set 0 # turn off keyboard backlight.
on-resume = brightnessctl -rd rgb:kbd_backlight # turn on keyboard backlight.
}
listener {
timeout = 190 # 1min
on-timeout = loginctl lock-session # lock screen when timeout has passed
}
listener {
timeout = 190 # 5.5min
on-timeout = hyprctl dispatch dpms off # screen off when timeout has passed
on-resume = hyprctl dispatch dpms on && brightnessctl -r # screen on when activity is detected after timeout has fired.
}
listener {
timeout = 900 # 30min
on-timeout = systemctl suspend # suspend pc
}

537
hypr/hyprland.conf Normal file
View File

@@ -0,0 +1,537 @@
################
### MONITORS ###
################
# See https://wiki.hyprland.org/Configuring/Monitors/
monitor=eDP-1, 1920x1080, 0x0, 1
monitor=HDMI-A-1, 1920x1080, 0x-1080, 1
###################
### MY PROGRAMS ###
###################
# See https://wiki.hyprland.org/Configuring/Keywords/
# Set programs that you use
$terminal = kitty
$fastTerminal = kitty --single-instance
$fileManager = thunar
$menu = $HOME/.config/rofi-wayland/launchers/type-6/launcher.sh
$browser = zen-browser
$privateBrowser = zen-browser --private-window
#################
### AUTOSTART ###
#################
# Autostart necessary processes (like notifications daemons, status bars, etc.)
# Or execute your favorite apps at launch like this:
exec-once = waybar & hyprpaper & hypridle &
exec-once = systemctl --user startexec-once=dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP hyprpaper.service
exec-once = hyprsunset
exec-once = libinput-gestures
exec-once = copyq --start-server
exec-once = /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1 &
exec-once = thunar --daemon &
exec-once = touch /tmp/toggle_ssocks
exec-once = ~/.config/bspwm/proxy.sh &
exec-once = nextcloud --background &
exec-once = [workspace 8 silent] telegram-desktop
exec-once = [workspace 7 silent] superproductivity
# exec-once = $terminal
# exec-once = nm-applet &
# exec-once = waybar & hyprpaper & firefox
#############################
### ENVIRONMENT VARIABLES ###
#############################
# See https://wiki.hyprland.org/Configuring/Environment-variables/
env = XCURSOR_SIZE,24
env = HYPRCURSOR_SIZE,24
###################
### PERMISSIONS ###
###################
# See https://wiki.hyprland.org/Configuring/Permissions/
# Please note permission changes here require a Hyprland restart and are not applied on-the-fly
# for security reasons
# ecosystem {
# enforce_permissions = 1
# }
# permission = /usr/(bin|local/bin)/grim, screencopy, allow
# permission = /usr/(lib|libexec|lib64)/xdg-desktop-portal-hyprland, screencopy, allow
# permission = /usr/(bin|local/bin)/hyprpm, plugin, allow
#####################
### LOOK AND FEEL ###
#####################
# Refer to https://wiki.hyprland.org/Configuring/Variables/
# https://wiki.hyprland.org/Configuring/Variables/#general
general {
gaps_in = 12.5
gaps_out = 20
border_size = 3
# https://wiki.hyprland.org/Configuring/Variables/#variable-types for info about colors
col.active_border = rgba(E96375ff) rgba(EB75DDff) 45deg
col.inactive_border = rgba(4B535Bff) # rgba(595959aa)
# Set to true enable resizing windows by clicking and dragging on borders and gaps
resize_on_border = false
# Please see https://wiki.hyprland.org/Configuring/Tearing/ before you turn this on
allow_tearing = true # false
layout = dwindle
no_focus_fallback = true
snap {
enabled = true
}
}
# https://wiki.hyprland.org/Configuring/Variables/#decoration
decoration {
rounding = 10
rounding_power = 2
# Change transparency of focused and unfocused windows
active_opacity = 1.0
inactive_opacity = 1.0
shadow {
enabled = false # true
range = 4
render_power = 3
color = rgba(1a1a1aee)
}
# https://wiki.hyprland.org/Configuring/Variables/#blur
blur {
enabled = true
size = 5
passes = 1
vibrancy = 0.1696
}
}
group {
col.border_active = rgba(E96375ff) rgba(EB75FFff) 45deg
col.border_inactive = rgba(F9730032) rgba(FB850032) 45deg
# col.border_locked_active = rgba(E96375ff) rgba(EB75FFff) 45deg
# col.border_locked_inactive = rgba(E96375ff) rgba(EB75FFff) 45deg
groupbar {
# font_size = 12
text_color = rgba(ffffff00)
render_titles = false
indicator_height = 10
rounding = 5
round_only_edges = false
col.active = rgba(F8859Eff)
col.inactive = rgba(32323264) rgba(32323264) 45deg
gaps_in = 5
gaps_out = 5
}
}
source = ~/.config/hypr/grayscale.conf
# https://wiki.hyprland.org/Configuring/Variables/#animations
animations {
enabled = yes, please :)
# Default animations, see https://wiki.hyprland.org/Configuring/Animations/ for more
bezier = easeOutQuint,0.23,1,0.32,1
bezier = easeInOutCubic,0.65,0.05,0.36,1
bezier = linear,0,0,1,1
bezier = almostLinear,0.5,0.5,0.75,1.0
bezier = quick,0.15,0,0.1,1
animation = global, 1, 10, default
animation = border, 1, 5.39, easeOutQuint
animation = windows, 1, 4.79, easeOutQuint
animation = windowsIn, 1, 4.1, easeOutQuint, popin 87%
animation = windowsOut, 1, 1.49, linear, popin 87%
animation = fadeIn, 1, 1.73, almostLinear
animation = fadeOut, 1, 1.46, almostLinear
animation = fade, 1, 3.03, quick
animation = layers, 1, 3.81, easeOutQuint
animation = layersIn, 1, 4, easeOutQuint, fade
animation = layersOut, 1, 1.5, linear, fade
animation = fadeLayersIn, 1, 1.79, almostLinear
animation = fadeLayersOut, 1, 1.39, almostLinear
animation = workspaces, 1, 1.94, almostLinear, fade
animation = workspacesIn, 1, 1.21, almostLinear, fade
animation = workspacesOut, 1, 1.94, almostLinear, fade
animation = layers, 1, 7, default, slide
}
# Ref https://wiki.hyprland.org/Configuring/Workspace-Rules/
# "Smart gaps" / "No gaps when only"
# uncomment all if you wish to use that.
# workspace = w[tv1], gapsout:0, gapsin:0
# workspace = f[1], gapsout:0, gapsin:0
workspace = 1, monitor:eDP-1
workspace = 2, monitor:eDP-1
workspace = 3, monitor:eDP-1
workspace = 4, monitor:eDP-1
workspace = 5, monitor:eDP-1
workspace = 6, monitor:eDP-1
workspace = 7, monitor:eDP-1
workspace = 8, monitor:eDP-1
workspace = 9, monitor:eDP-1
workspace = 10, monitor:HDMI-A-1
workspace = 11, monitor:HDMI-A-1
workspace = 12, monitor:HDMI-A-1
workspace = 13, monitor:eDP-1
workspace = 14, monitor:HDMI-A-1
workspace = 13, on-created-empty:hyprctl dispatch workspace 1
workspace = 14, on-created-empty:hyprctl dispatch workspace 10
# workspace = 14, on-created-empty:
# windowrule = bordersize 0, floating:0, onworkspace:w[tv1]
# windowrule = rounding 0, floating:0, onworkspace:w[tv1]
# windowrule = bordersize 0, floating:0, onworkspace:f[1]
# windowrule = rounding 0, floating:0, onworkspace:f[1]
# See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more
dwindle {
pseudotile = true # Master switch for pseudotiling. Enabling is bound to mainMod + P in the keybinds section below
preserve_split = true # You probably want this
smart_resizing = false
force_split = 2
}
# See https://wiki.hyprland.org/Configuring/Master-Layout/ for more
master {
new_status = master
}
# https://wiki.hyprland.org/Configuring/Variables/#misc
misc {
force_default_wallpaper = 1 # Set to 0 or 1 to disable the anime mascot wallpapers
disable_hyprland_logo = true # If true disables the random hyprland logo / anime girl background. :(
vfr = true
animate_manual_resizes = true
enable_swallow = true
middle_click_paste = false
enable_anr_dialog = false
}
#############
### INPUT ###
#############
# https://wiki.hyprland.org/Configuring/Variables/#input
input {
kb_layout= us,ru
kb_options= grp:caps_toggle,grp_led:caps
# kb_variant = ,qwerty
# kb_model =
# kb_rules =
follow_mouse = 0 # 2
float_switch_override_focus = 0
sensitivity = 0.2 # -1.0 - 1.0, 0 means no modification.
touchpad {
natural_scroll = true
disable_while_typing = true
middle_button_emulation = true
}
}
# https://wiki.hyprland.org/Configuring/Variables/#gestures
gestures {
workspace_swipe = true
}
# Example per-device config
# See https://wiki.hyprland.org/Configuring/Keywords/#per-device-input-configs for more
device {
name = epic-mouse-v1
sensitivity = -0.5
}
###################
### KEYBINDINGS ###
###################
# See https://wiki.hyprland.org/Configuring/Keywords/
$mainMod = SUPER # Sets "Windows" key as main modifier
# Example binds, see https://wiki.hyprland.org/Configuring/Binds/ for more
bind = $mainMod ALT, Q, exit,
bind = $mainMod SHIFT, delete, exec, shutdown now
# Open programs
bind = $mainMod, Return, exec, $terminal
bind = $mainMod, E, exec, $fileManager
bind = $mainMod, Q, exec, $browser
bind = $mainMod SHIFT, Q, exec, $privateBrowser
bind = $mainMod, Backslash, exec, $fastTerminal
bind = $mainMod, Space, exec, $menu
# Open floating terminal
bind = $mainMod SHIFT, Return, exec, [float; size 800 600; move center] $fastTerminal --class kitty-float
# Open bluetooth
bind = $mainMod, F3, exec, [float; size 600 400; move center] $fastTerminal --class kitty-float bluetuith
# Open alsamixer
bind = $mainMod, F2, exec, [float; size 600 400; move center] $fastTerminal --class kitty-float alsamixer -V all
# Open ncmpcpp
bind = $mainMod, F1, exec, [float; size 600 400; move center] $fastTerminal --class kitty-float ncmpcpp
# Close window
binde = $mainMod, W, killactive,
# Kill window
binde = $mainMod SHIFT, W, forcekillactive,
# Change window modes
bind = $mainMod, S, togglefloating,
bind = $mainMod, T, settiled,
bind = $mainMod, F, fullscreen,
bind = $mainMod CTRL, P, pin,
# Bring to top
bind = $mainMod, Z, bringactivetotop
# Make window float and center it
bind = $mainMod SHIFT, S, setfloating,
bind = $mainMod SHIFT, S, resizeactive, exact 800 600
bind = $mainMod SHIFT, S, centerwindow,
bind = $mainMod, P, pseudo, # dwindle
bind = $mainMod, D, togglesplit, # dwindle
# bind = $mainMod SHIFT, Print, exec, IMG=~/Pictures/Screenshots/$(date +%Y-%m-%d_%H-%m-%s).png grim -g "$(slurp -d)" - | swappy -f -
# bind = $mainMod, Print, exec, IMG=~/Pictures/Screenshots/$(date +%Y-%m-%d_%H-%m-%s).png && grim -g "$(slurp)" $IMG && wl-copy < $IMG
bind = $mainMod SHIFT, Print, exec, grimblast --freeze copysave area ~/Pictures/Screenshots/$(date +%Y-%m-%d_%H-%m-%s).png && play ~/Templates/Sounds/photo.mp3
bind = $mainMod, Print, exec, play ~/Templates/Sounds/photo.mp3 & grimblast --freeze copysave output ~/Pictures/Screenshots/$(date +%Y-%m-%d_%H-%m-%s).png
# Move focus with mainMod + arrow keys
bind = $mainMod, h, movefocus, l
bind = $mainMod, l, movefocus, r
bind = $mainMod, k, movefocus, u
bind = $mainMod, j, movefocus, d
# Switch workspaces with mainMod + [0-9]
bind = $mainMod, 1, workspace, 1
bind = $mainMod, 2, workspace, 2
bind = $mainMod, 3, workspace, 3
bind = $mainMod, 4, workspace, 4
bind = $mainMod, 5, workspace, 5
bind = $mainMod, 6, workspace, 6
bind = $mainMod, 7, workspace, 7
bind = $mainMod, 8, workspace, 8
bind = $mainMod, 9, workspace, 9
bind = $mainMod, 0, workspace, 10
bind = $mainMod, minus, workspace, 11
bind = $mainMod, equal, workspace, 12
# Move active window to a workspace with mainMod + SHIFT + [0-9]
bind = $mainMod SHIFT, 1, movetoworkspacesilent, 1
bind = $mainMod SHIFT, 2, movetoworkspacesilent, 2
bind = $mainMod SHIFT, 3, movetoworkspacesilent, 3
bind = $mainMod SHIFT, 4, movetoworkspacesilent, 4
bind = $mainMod SHIFT, 5, movetoworkspacesilent, 5
bind = $mainMod SHIFT, 6, movetoworkspacesilent, 6
bind = $mainMod SHIFT, 7, movetoworkspacesilent, 7
bind = $mainMod SHIFT, 8, movetoworkspacesilent, 8
bind = $mainMod SHIFT, 9, movetoworkspacesilent, 9
bind = $mainMod SHIFT, 0, movetoworkspacesilent, 10
bind = $mainMod SHIFT, minus, movetoworkspacesilent, 11
bind = $mainMod SHIFT, equal, movetoworkspacesilent, 12
# Cycle monitors
bind = $mainMod SHIFT, U, swapactiveworkspaces, eDP-1 HDMI-A-1
bind = $mainMod, O, focusmonitor, +1
# Example special workspace (scratchpad)
bind = $mainMod, M, togglespecialworkspace, magic
bind = $mainMod SHIFT, M, movetoworkspace, special:magic
# Scroll through existing workspaces with mainMod + scroll
bind = $mainMod, bracketleft, workspace, r-1
bind = $mainMod, bracketright, workspace, r+1
bind = $mainMod SHIFT, bracketleft, workspace, m-1
bind = $mainMod SHIFT, bracketright, workspace, m+1
bind = $mainMod, grave, togglespecialworkspace, dungeon
bind = $mainMod SHIFT, grave, movetoworkspace, special:dungeon
# Cringy mouse movement
binde = $mainMod ALT, up, exec, ~/.config/hypr/scripts/weirdmouse.sh up
binde = $mainMod ALT, down, exec, ~/.config/hypr/scripts/weirdmouse.sh down
binde = $mainMod ALT, left, exec, ~/.config/hypr/scripts/weirdmouse.sh left
binde = $mainMod ALT, right, exec, ~/.config/hypr/scripts/weirdmouse.sh right
# Move/resize windows with mainMod + LMB/RMB and dragging
bindm = $mainMod, mouse:272, movewindow
#bindm = SUPER, Shift_L, swapwindow
bindm = $mainMod, mouse:273, resizewindow
bindm = SUPER, ALT_L, resizewindow
# Move windows with keyboard
bind = $mainMod SHIFT, h, swapwindow, l
bind = $mainMod SHIFT, l, swapwindow, r
bind = $mainMod SHIFT, j, swapwindow, d
bind = $mainMod SHIFT, k, swapwindow, u
# Cycle through windows with mainMod + C
bind = $mainMod, C, cyclenext
bind = $mainMod SHIFT, C, cyclenext, prev
# Go to previous window and back
bind = ALT, TAB, focuscurrentorlast
bind = $mainMod, I, focusurgentorlast
bind = $mainMod, Tab, workspace, previous
# Resize windows in different directions via keyboard
binde = $mainMod ALT, h, resizeactive, -60 0
binde = $mainMod ALT, l, resizeactive, 60 0
binde = $mainMod ALT, j, resizeactive, 0 60
binde = $mainMod ALT, k, resizeactive, 0 -60
binde = $mainMod ALT SHIFT, h, resizeactive, 60 0
binde = $mainMod ALT SHIFT, l, resizeactive, -60 0
binde = $mainMod ALT SHIFT, j, resizeactive, 0 -60
binde = $mainMod ALT SHIFT, k, resizeactive, 0 60
# Swap windows in different directions via keyboard
binde = $mainMod, Left, moveactive, -100 0
binde = $mainMod, Right, moveactive, 100 0
binde = $mainMod, Down, moveactive, 0 100
binde = $mainMod, Up, moveactive, 0 -100
# Move windows in different directions via keyboard
bind = $mainMod SHIFT, Left, movewindow, l
bind = $mainMod SHIFT, Right, movewindow, r
bind = $mainMod SHIFT, Down, movewindow, d
bind = $mainMod SHIFT, Up, movewindow, u
# Receptacles
bind = $mainMod CTRL, H, layoutmsg, preselect l
bind = $mainMod CTRL, L, layoutmsg, preselect r
bind = $mainMod CTRL, J, layoutmsg, preselect d
bind = $mainMod CTRL, K, layoutmsg, preselect u
# Window grouping
bind = $mainMod CTRL ALT, M, togglegroup
bind = $mainMod, comma, changegroupactive, b
bind = $mainMod, period, changegroupactive, f
bind = $mainMod CTRL ALT, Up, movewindoworgroup, u
bind = $mainMod CTRL ALT, Down, movewindoworgroup, d
bind = $mainMod CTRL ALT, Left, movewindoworgroup, l
bind = $mainMod CTRL ALT, Right, movewindoworgroup, r
# Laptop multimedia keys for volume and LCD brightness
bindel = ,XF86AudioRaiseVolume, exec, wpctl set-volume -l 1 @DEFAULT_AUDIO_SINK@ 5%+
bindel = ,XF86AudioLowerVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%-
bindel = ,XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle
bindel = ,XF86AudioMicMute, exec, wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle
bindel = ,XF86MonBrightnessUp, exec, brightnessctl -e4 -n2 set 5%+
bindel = ,XF86MonBrightnessDown, exec, brightnessctl -e4 -n2 set 5%-
# Requires playerctl
bindl = , XF86AudioNext, exec, playerctl next
bindl = , XF86AudioPause, exec, playerctl play-pause
bindl = , XF86AudioPlay, exec, playerctl play-pause
bindl = , XF86AudioPrev, exec, playerctl previous
# Toggle grayscale mode
bind = $mainMod CTRL, G, exec, ~/.config/hypr/scripts/grayscale-toggle.sh
# Game mode
bind = $mainMod SHIFT, G, exec, ~/.config/hypr/scripts/gamemode.sh
# Freeze window
bind = $mainMod SHIFT, F, exec, hyprfreeze -a -s
bind = $mainMod SHIFT, F, tagwindow, zawarudo
# Lock screen
bind = $mainMod, Backspace, exec, hyprlock
bind = $mainMod SHIFT, Backspace, exec, shutdown now
# Discord PTT
bindr = , F8, sendshortcut, CTRL SHIFT, F8, class:^(vesktop)$
# Telegram PTT
binde = $mainMod CTRL, F9, tagwindow, voicechatuz
bindr = , F9, sendshortcut, , F9, class:TelegramDesktop
windowrule = bordercolor rgba(ffff00ff) rgba(ffff0055),tag:voicechatuz
# bindr = , F8, sendshortcut, , Space, title:^(ready\ or\ тундра\.\.\.)$
# bindr = , F8, sendshortcut, , Space, title:^(КОМАНДА\ Эспада)$
##############################
### WINDOWS AND WORKSPACES ###
##############################
# See https://wiki.hyprland.org/Configuring/Window-Rules/ for more
# See https://wiki.hyprland.org/Configuring/Workspace-Rules/ for workspace rules
# Floating kitty
windowrule = float,class:^(kitty-float)$
windowrule = size 600 400,class:^(kitty-float)$
windowrule = move center,class:^(kitty-float)$
# Zenity
windowrule = float,class:^(zenity)$
# Super Productivity
windowrule = workspace 7 silent,class:^(superProductivity)$
# Telegram
windowrule = workspace 8 silent,class:^(TelegramDesktop)$
windowrule = group override set always,class:^(TelegramDesktop)$
windowrule = workspace 8 silent,class:^(org.telegram.desktop)$
windowrule = group override set always,class:^(org.telegram.desktop)$
# Vesktop
windowrule = workspace 8 silent,class:^(vesktop)$
windowrule = group override set always,class:^(vesktop)$
# Nextcloud
windowrule = float,animation slide top,resize 800 600,move center,class:^(com.nextcloud.desktopclient.nextcloud)$
# com.saivert.pwvucontrol
windowrule = float,class:^(com.saivert.pwvucontrol)$
windowrule = size 600 400,class:^(com.saivert.pwvucontrol)$
windowrule = move center,class:^(com.saivert.pwvucontrol)$
# Frozen windows
windowrule = bordercolor rgba(ffff00ff) rgba(ffff0055),tag:zawarudo
# Ignore maximize requests from apps. You'll probably like this.
windowrule = suppressevent maximize, class:.*
# Fix some dragging issues with XWayland
windowrule = nofocus,class:^$,title:^$,xwayland:1,floating:1,fullscreen:0,pinned:0
layerrule = blur, rofi
layerrule = animation slideIn left, rofi

110
hypr/hyprlock.conf Normal file
View File

@@ -0,0 +1,110 @@
# sample hyprlock.conf
# for more configuration options, refer https://wiki.hyprland.org/Hypr-Ecosystem/hyprlock
#
# rendered text in all widgets supports pango markup (e.g. <b> or <i> tags)
# ref. https://wiki.hyprland.org/Hypr-Ecosystem/hyprlock/#general-remarks
#
# shortcuts to clear password buffer: ESC, Ctrl+U, Ctrl+Backspace
#
# you can get started by copying this config to ~/.config/hypr/hyprlock.conf
#
$font = Iosevka
general {
hide_cursor = true
}
# uncomment to enable fingerprint authentication
# auth {
# fingerprint {
# enabled = true
# ready_message = Scan fingerprint to unlock
# present_message = Scanning...
# retry_delay = 250 # in milliseconds
# }
# }
animations {
enabled = true
bezier = linear, 1, 1, 0, 0
animation = fadeIn, 1, 5, linear
animation = fadeOut, 1, 5, linear
animation = inputFieldDots, 1, 2, linear
}
background {
monitor =
path = screenshot
# path = /home/greg/Pictures/Wallpapers/japan_tower_sakura.jpg
blur_passes = 3
}
image {
path = /home/greg/Pictures/Things/niko.jpg
position = 0, 40
halign = center
valign = center
size = 100, 100
rounding = -1
border_color = rgba(E96375ff) rgba(EB75DDff) 45deg
shadow_passes = 1
shadow_size = 3
shadow_color = rgb(aaaaaa)
}
input-field {
monitor =
size = 15%, 5%
outline_thickness = 3
inner_color = rgba(0, 0, 0, 0.2) # no fill
outer_color = rgba(E96375ff) rgba(EB75DDff) 45deg
check_color = rgba(EB75DDff) rgba(E96375ff) 120deg
fail_color = rgba(ff6633ee) rgba(ff0066ee) 40deg
font_color = rgb(255,255,255)
fade_on_empty = false
rounding = 15
font_family = $font
placeholder_text = パスワード
fail_text = $PAMFAIL
# uncomment to use a letter instead of a dot to indicate the typed password
# dots_text_format = *
# dots_size = 0.4
dots_spacing = 0.3
# uncomment to use an input indicator that does not show the password length (similar to swaylock's input indicator)
# hide_input = true
position = 0, -100
halign = center
valign = center
}
# TIME
label {
monitor =
text = $TIME # ref. https://wiki.hyprland.org/Hypr-Ecosystem/hyprlock/#variable-substitution
font_size = 90
font_family = $font
position = 0, -50
halign = center
valign = top
}
# DATE
label {
monitor =
text = cmd[update:60000] date +"%A, %d %B %Y" # update every 60 seconds
font_size = 25
font_family = $font
position = 0, -200
halign = center
valign = top
}

5
hypr/hyprpaper.conf Normal file
View File

@@ -0,0 +1,5 @@
preload = /home/greg/Pictures/Wallpapers/archloli.png
wallpaper = eDP-1,/home/greg/Pictures/Wallpapers/archloli.png
wallpaper = HDMI-A-1,/home/greg/Pictures/Wallpapers/archloli.png
ipc = off

66
hypr/scripts/dimscreen.sh Executable file
View File

@@ -0,0 +1,66 @@
#!/bin/bash
# Example notifier script -- lowers screen brightness, then waits to be killed
# and restores previous brightness on exit.
## CONFIGURATION ##############################################################
# Brightness will be lowered to this value.
min_brightness=0
# If you have a driver without RandR backlight property (e.g. radeon), set this
# to use the sysfs interface and create a .conf file in /etc/tmpfiles.d/
# containing the following line to make the sysfs file writable for group
# "users":
#
# m /sys/class/backlight/acpi_video0/brightness 0664 root users - -
#
#sysfs_path=/sys/class/backlight/acpi_video0/brightness
# Time to sleep (in seconds) between increments when using sysfs. If unset or
# empty, fading is disabled.
fade_step_time=0.05
###############################################################################
get_brightness() {
brightnessctl get # Get current brightness level
}
set_brightness() {
brightnessctl set $1 # Set brightness to the specified percentage
}
fade_brightness() {
local current_brightness=$(get_brightness)
local target_brightness=$1
if [[ $current_brightness -eq $target_brightness ]]; then
return # No need to change brightness
fi
local step
local fade_steps=$(( (current_brightness - target_brightness) / 1000 ))
local increment=1000
for (( step=0; step<fade_steps; step++ )); do
if [[ ! -e /tmp/asleepin ]]; then
exit 0
fi
local new_brightness=$(( current_brightness - increment * (step + 1) ))
set_brightness $new_brightness
sleep $fade_step_time
done
set_brightness $target_brightness # Ensure we set to the exact target
}
trap 'exit 0' TERM INT
trap "set_brightness $(get_brightness); kill %%" EXIT
fade_brightness $min_brightness
while [ -e /tmp/asleepin ]; do
sleep 0.5
done
exit 0
#wait

14
hypr/scripts/gamemode.sh Executable file
View File

@@ -0,0 +1,14 @@
#!/usr/bin/env sh
HYPRGAMEMODE=$(hyprctl getoption animations:enabled | awk 'NR==1{print $2}')
if [ "$HYPRGAMEMODE" = 1 ] ; then
hyprctl --batch "\
keyword animations:enabled 0;\
keyword decoration:shadow:enabled 0;\
keyword decoration:blur:enabled 0;\
keyword general:gaps_in 0;\
keyword general:gaps_out 0;\
keyword general:border_size 1;\
keyword decoration:rounding 0"
exit
fi
hyprctl reload

22
hypr/scripts/grayscale-toggle.sh Executable file
View File

@@ -0,0 +1,22 @@
#!/bin/bash
FILENAME="$HOME/.config/hypr/grayscale.conf"
# Check if the file exists
if [ ! -f "$FILENAME" ]; then
echo "File not found: $FILENAME"
exit 1
fi
# Check if the file is already commented
if grep -q '^[[:space:]]*#' "$FILENAME"; then
echo "Uncommenting the file: $FILENAME"
# Uncomment the lines
sed -i 's/^[[:space:]]*#\s*//g' "$FILENAME"
else
echo "Commenting the file: $FILENAME"
# Comment the lines
sed -i 's/^/# /' "$FILENAME"
fi
hyprctl reload

39
hypr/scripts/weirdmouse.sh Executable file
View File

@@ -0,0 +1,39 @@
#!/bin/bash
# Define the file to store the position
POSITION_FILE="/tmp/weirdmouse"
# Initialize position if the file does not exist
if [ ! -f "$POSITION_FILE" ]; then
echo "0 0" > "$POSITION_FILE"
fi
# Read the current position from the file
read -r x y < "$POSITION_FILE"
# Update the position based on the argument
case "$1" in
up)
y=$((y - 10))
;;
down)
y=$((y + 10))
;;
left)
x=$((x - 10))
;;
right)
x=$((x + 10))
;;
*)
echo "Usage: $0 {up|down|left|right}"
exit 1
;;
esac
# Save the new position to the file
echo "$x $y" > "$POSITION_FILE"
# Move the mouse cursor to the new position
hyprctl dispatch movecursor "$x" "$y"

24
kitty/colors.conf Normal file
View File

@@ -0,0 +1,24 @@
# Color theme Base2Tone Suburb
# Auto-generated by Gogh (https//Gogh-Co.github.io/Gogh/)
color0 #444551
color1 #9E2238
color2 #BB6F80
color3 #DA97B0
color4 #b12761
color5 #D58399
color6 #D6D8DA
color7 #D6D8DA
color8 #62636F
color9 #BC4056
color10 #eB9FB0
color11 #F8B5CE
color12 #d14781
color13 #F3A1B7
color14 #F4F6F8
color15 #F4F6F8
background #1e1f29
foreground #878b96
cursor #d14781

23
kitty/colors.old Normal file
View File

@@ -0,0 +1,23 @@
# Color theme: Base4Tone Classic P
# Auto-generated by Gogh (https://Gogh-Co.github.io/Gogh/)
color0 #1c1d21
color1 #BF562F
color2 #1398aa
color3 #3ccadd
color4 #929ff7
color5 #a57af0
color6 #23b4c7
color7 #ffe8ee
color8 #57585d
color9 #c06935
color10 #5ad2e2
color11 #a4e6ef
color12 #d0d5fb
color13 #b792f6
color14 #c6cdfb
color15 #f6f6f9
#background #09141B
background #0e1b28
foreground #9092a2
cursor #6a878a

2601
kitty/kitty.conf Normal file
View File

File diff suppressed because it is too large Load Diff

24
kitty/sakura.conf Normal file
View File

@@ -0,0 +1,24 @@
# Color theme Base2Tone Suburb
# Auto-generated by Gogh (https//Gogh-Co.github.io/Gogh/)
color0 #444551
color1 #9E2238
color2 #BB6F80
color3 #DA97B0
color4 #b12761
color5 #D58399
color6 #D6D8DA
color7 #D6D8DA
color8 #62636F
color9 #BC4056
color10 #eB9FB0
color11 #F8B5CE
color12 #d14781
color13 #F3A1B7
color14 #F4F6F8
color15 #F4F6F8
background #1e1f29
foreground #878b96
cursor #d14781

24
kitty/sakura.conf.old Normal file
View File

@@ -0,0 +1,24 @@
# Color theme Base2Tone Suburb
# Auto-generated by Gogh (https//Gogh-Co.github.io/Gogh/)
color0 #444551
color1 #9E2238
color2 #BB6F80
color3 #DA97B0
color4 #b12761
color5 #D58399
color6 #D6D8DA
color7 #D6D8DA
color8 #62636F
color9 #BC4056
color10 #eB9FB0
color11 #F8B5CE
color12 #d14781
color13 #F3A1B7
color14 #F4F6F8
color15 #F4F6F8
background #1e1f29
foreground #878b96
cursor #d14781

22
kitty/suburb.conf.old Normal file
View File

@@ -0,0 +1,22 @@
# Color theme: Base2Tone Suburb
# Auto-generated by Gogh (https://Gogh-Co.github.io/Gogh/)
color0 #1e202f
color1 #7586f5
color2 #fb6fa9
color3 #ffb3d2
color4 #8696fd
color5 #fb6fa9
color6 #a0acfe
color7 #878ba6
color8 #2f3452
color9 #fe81b5
color10 #292c3d
color11 #242844
color12 #5b6080
color13 #d2d8fe
color14 #f764a1
color15 #ebedff
background #1e202f
foreground #878ba6
cursor #d14781

203
libinput-gestures.conf Normal file
View File

@@ -0,0 +1,203 @@
# Configuration file for libinput-gestures.
# Mark Blakeney, Sep 2015
#
# The default configuration file exists at /etc/libinput-gestures.conf
# but a user can create a personal custom configuration file at
# ~/.config/libinput-gestures.conf.
#
# Lines starting with '#' and blank lines are ignored. Currently
# "gesture" and "device" configuration keywords are supported as
# described below. The keyword can optionally be appended with a ":" (to
# maintain compatibility with original format configuration files).
#
# Each gesture line has 3 [or 4] arguments separated by whitespace:
#
# action motion [finger_count] command
#
# where action and motion is either:
# swipe up
# swipe down
# swipe left
# swipe right
# swipe left_up
# swipe left_down
# swipe right_up
# swipe right_down
# pinch in
# pinch out
# pinch clockwise
# pinch anticlockwise
# hold on (hold gesture available since libinput 1.19)
# hold on+1.5 (another hold gesture, invoked after delay)
#
# command is the remainder of the line and is any valid shell command +
# arguments. NOTE that the command is run directly and is not parsed by
# your shell. If you want shell parsing and substitutions etc then use a
# script as described in the CONFIGURATION section of the main README.
#
# finger_count is a single numeric digit and is optional (and is
# typically 3 or 4). If specified then the command is executed when
# exactly that number of fingers is used in the gesture. If not
# specified then the command is executed when that gesture is executed
# with any number of fingers. Gesture lines specified with finger_count
# have priority over the same gesture specified without any
# finger_count.
#
# Typically command will be _internal, or xdotool. See "man xdotool" for
# the many things you can action with that tool. Note that unfortunately
# xdotool does not work with native Wayland clients.
###############################################################################
# SWIPE GESTURES:
###############################################################################
# Note the default is an "internal" command that uses wmctrl to switch
# workspaces and, unlike xdotool, works on both Xorg and Wayland (via
# XWayland). It also can be configured for vertical and horizontal
# switching over tabular workspaces, as per the example below. You can
# also add "-w" to the internal command to allow wrapping workspaces.
# Ensure you install wmctrl if you use _internal.
# Move to next workspace (works for GNOME/KDE/etc on Wayland and Xorg)
# gesture swipe up _internal ws_up
# NOTE ABOUT FINGER COUNT:
# The above command will configure this command for all fingers (i.e. 3
# for 4) but to configure it for 3 fingers only, change it to:
# gesture swipe up 3 _internal ws_up
# Then you can configure something else for 4 fingers or leave 4 fingers
# unconfigured. You can configure an explicit finger count like this for
# all example commands in this configuration file.
#
# gesture swipe up xdotool key super+Page_Down
gesture swipe up 4 wpctl set-volume -l 1 @DEFAULT_AUDIO_SINK@ 10%+
gesture swipe down 4 wpctl set-volume -l 1 @DEFAULT_AUDIO_SINK@ 10%-
# Move to prev workspace (works for GNOME/KDE/etc on Wayland and Xorg)
# gesture swipe down _internal ws_down
# gesture swipe down xdotool key super+Page_Up
# Browser go forward (works only for Xorg, and Xwayland clients)
# gesture swipe left xdotool key alt+Right
# Browser go back (works only for Xorg, and Xwayland clients)
# gesture swipe right xdotool key alt+Left
# Open new browser tag ("hold on" available since libinput 1.19)
# gesture hold on 4 xdotool key control+t
# NOTE: If you don't use "natural" scrolling direction for your touchpad
# then you may want to swap the above default left/right and up/down
# configurations.
# Optional extended swipe gestures, e.g. for browser tab navigation:
#
# Jump to next open browser tab
# gesture swipe right_up xdotool key control+Tab
#
# Jump to previous open browser tab
# gesture swipe left_up xdotool key control+shift+Tab
#
# Close current browser tab
# gesture swipe left_down xdotool key control+w
#
# Reopen and jump to last closed browser tab
# gesture swipe right_down xdotool key control+shift+t
# Example of 8 static workspaces, e.g. using KDE virtual-desktops,
# arranged in 2 rows of 4 columns across using swipe up/down/left/right
# to navigate in fixed planes. You can also add the "-w/--wrap" option
# to allow wrapping in any direction. You must configure your virtual
# desktops with the same column dimension.
# gesture swipe up _internal --cols 4 ws_up
# gesture swipe down _internal --cols 4 ws_down
# gesture swipe left _internal --cols 4 ws_left
# gesture swipe right _internal --cols 4 ws_right
#
# Example of 16 static workspaces, e.g. using KDE virtual-desktops,
# arranged in 4 rows of 4 columns across using swipe up/down/left/right
# to navigate in fixed planes, and also using swipe
# left_up/left_down/right_up/right_down to navigate diagonally. You can
# also add the "-w/--wrap" option to allow wrapping in any direction
# and/or diagonally. You must configure your virtual desktops with the
# same column dimension.
# gesture swipe up _internal --cols 4 ws_up
# gesture swipe down _internal --cols 4 ws_down
# gesture swipe left _internal --cols 4 ws_left
# gesture swipe right _internal --cols 4 ws_right
# gesture swipe left_up _internal --cols 4 ws_left_up
# gesture swipe left_down _internal --cols 4 ws_left_down
# gesture swipe right_up _internal --cols 4 ws_right_up
# gesture swipe right_down _internal --cols 4 ws_right_down
# Example virtual desktop switching for Ubuntu Unity/Compiz. The
# _internal command does not work for Compiz but you can explicitly
# configure the swipe commands to work for a Compiz virtual 2
# dimensional desktop as follows:
# gesture swipe up xdotool key ctrl+alt+Up
# gesture swipe down xdotool key ctrl+alt+Down
# gesture swipe left xdotool key ctrl+alt+Left
# gesture swipe right xdotool key ctrl+alt+Right
# Example to change audio volume (this works on both Wayland and Xorg):
# Note each swipe only steps volume once.
# swipe up 4 amixer set Master "8%+"
# swipe down 4 amixer set Master "8%-"
###############################################################################
# PINCH GESTURES:
###############################################################################
# GNOME SHELL open/close overview (works for GNOME on Xorg only)
# gesture pinch in xdotool key super+s
# gesture pinch out xdotool key super+s
# KDE Plasma open/close overview
# gesture pinch in xdotool key ctrl+F9
# gesture pinch out xdotool key ctrl+F9
# GNOME SHELL open/close overview (works for GNOME on Wayland and Xorg)
# Note since GNOME 3.24 on Wayland this is implemented natively so no
# real point configuring for Wayland.
# gesture pinch in dbus-send --session --type=method_call --dest=org.gnome.Shell /org/gnome/Shell org.gnome.Shell.Eval string:'Main.overview.toggle();'
# gesture pinch out dbus-send --session --type=method_call --dest=org.gnome.Shell /org/gnome/Shell org.gnome.Shell.Eval string:'Main.overview.toggle();'
# Optional extended pinch gestures:
# gesture pinch clockwise <whatever command>
# gesture pinch anticlockwise <whatever command>
###############################################################################
# This application normally determines your touchpad device
# automatically. Some users may have multiple touchpads but by default
# we use only the first one found. However, you can choose to specify
# the explicit device name to use. Run "libinput list-devices" to work
# out the name of your device (from the "Device:" field). Then add a
# device line specifying that name, e.g:
#
# device DLL0665:01 06CB:76AD Touchpad
#
# If the device name starts with a '/' then it is instead considered as
# the explicit device path although since device paths can change
# through reboots this is best to be a symlink. E.g. instead of specifying
# /dev/input/event12, you should use the corresponding full path link
# under /dev/input/by-path/ or /dev/input/by-id/.
#
# You can choose to use ALL touchpad devices by setting the device name
# to "all". E.g. Do this if you have multiple touchpads which you want
# to use in parallel. This reduces performance slightly so only set this
# if you have to.
#
# device all
###############################################################################
# You can set a minimum travel distance threshold before swipe gestures
# are actioned using the swipe_threshold configuration command.
# Specify this value in dots. The default is 0.
# E.g. set it to 100 dots with "swipe_threshold 100".
# swipe_threshold 0
###############################################################################
# You can set a timeout on gestures from start to end. The default is
# the value commented below. It can be any value in float secs >= 0.
# 0 = no timeout. E.g. set it to 2 secs with "timeout 2".
# timeout 1.5

431
mpd/mpd.conf Normal file
View File

@@ -0,0 +1,431 @@
# An example configuration file for MPD.
# Read the user manual for documentation: http://www.musicpd.org/doc/user/
# Files and directories #######################################################
#
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
#
music_directory "~/Music"
#
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
#
playlist_directory "~/.config/mpd/playlists"
#
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
#
#db_file "~/.mpd/database"
# These settings are the locations for the daemon log files for the daemon.
#
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog.
#
# If you use systemd, do not configure a log_file. With systemd, MPD
# defaults to the systemd journal, which is fine.
#
#log_file "~/.mpd/log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
#
# If you use systemd, do not configure a pid_file.
#
#pid_file "~/.mpd/pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
#
state_file "~/.mpd/state"
#
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#
#sticker_file "~/.mpd/sticker.sql"
#
###############################################################################
# General music daemon options ################################################
#
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
#
#user "nobody"
#
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#
#group "nogroup"
#
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other than the default, any.
# This setting can deny access to control of the daemon. Not effective if
# systemd socket activation is in use.
#
# For network
bind_to_address "localhost"
#
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
#
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#
port "6600"
#
# Suppress all messages below the given threshold. Use "verbose" for
# troubleshooting. Available setting arguments are "notice", "info", "verbose",
# "warning" and "error".
#
#log_level "notice"
#
# Setting "restore_paused" to "yes" puts MPD into pause mode instead
# of starting playback after startup.
#
restore_paused "yes"
#
# This setting enables MPD to create playlists in a format usable by other
# music players.
#
#save_absolute_paths_in_playlists "no"
#
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. The complete list of possible values can be
# found in the user manual.
# metadata_to_use ""
#
# This example just enables the "comment" tag without disabling all
# the other supported tags:
#metadata_to_use "+comment"
#
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
#
auto_update "yes"
#
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#
#auto_update_depth "3"
#
###############################################################################
# Symbolic link behavior ######################################################
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#
follow_outside_symlinks "yes"
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#
follow_inside_symlinks "yes"
#
###############################################################################
# Zeroconf / Avahi Service Discovery ##########################################
#
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#
#zeroconf_enabled "yes"
#
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network. %h will be replaced with the hostname.
#
#zeroconf_name "Music Player @ %h"
#
###############################################################################
# Permissions #################################################################
#
# If this setting is set, MPD will require password authorization. The password
# setting can be specified multiple times for different password profiles.
#
#password "password@read,add,control,admin"
password "kapuchinamusica@read,add,control,admin"
#
# This setting specifies the permissions a user has who has not yet logged in.
#
#default_permissions "read,add,control,admin"
#
###############################################################################
# Database #######################################################################
#
# An example of a database section instead of the old 'db_file' setting.
# It enables mounting other storages into the music directory.
#
#database {
# plugin "simple"
# path "~/.local/share/mpd/db"
# cache_directory "~/.local/share/mpd/cache"
#}
#
# An example of database config for a satellite setup
#
#music_directory "nfs://fileserver.local/srv/mp3"
#database {
# plugin "proxy"
# host "other.mpd.host"
# port "6600"
#}
# Input #######################################################################
#
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
}
#
###############################################################################
# Audio Output ################################################################
#
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
#
# An example of an ALSA output:
#
##audio_output {
## type "alsa"
## name "Default ALSA Output"
## device "hw:0,0" # optional
## mixer_type "hardware" # optional
## mixer_device "default" # optional
## mixer_control "PCM" # optional
## mixer_index "0" # optional
##}
#
# An example of an OSS output:
#
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
#}
#
# An example of a shout output (for streaming to Icecast):
#
#audio_output {
# type "shout"
# encoder "vorbis" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## url "http://example.com" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
#}
#
# An example of a recorder output:
#
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
#}
#
# An example of a httpd output (built-in HTTP streaming server):
#
audio_output {
type "httpd"
name "Weed's MPD"
encoder "vorbis" # optional, vorbis or lame
path "/tmp/mpdstream"
port "26669"
always_on "yes"
tags "yes"
bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
format "44100:16:2"
# max_clients "0" # optional 0=no limit
}
#
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#
audio_output {
type "pulse"
name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## media_role "media_role" #optional
}
audio_output {
type "fifo"
name "Visualizer feed"
path "/tmp/mpd.fifo"
format "44100:16:2"
}
#
# An example of a winmm output (Windows multimedia API).
#
#audio_output {
# type "winmm"
# name "My WinMM output"
## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
# or
## device "0" # optional
## mixer_type "hardware" # optional
#}
#
# An example of a wasapi output (Windows multimedia API).
#
#audio_output {
# type "wasapi"
# name "My WASAPI output"
## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
# or
## device "0" # optional
## mixer_type "hardware" # optional
## Exclusive mode blocks all other audio source, and get best audio quality without resampling.
## exclusive "no" # optional
## Enumerate all devices in log.
## enumerate "no" # optional
#}
#
# An example of an openal output.
#
#audio_output {
# type "openal"
# name "My OpenAL output"
## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
#}
#
# An example of an sndio output.
#
#audio_output {
# type "sndio"
# name "sndio output"
# mixer_type "hardware"
#}
#
# An example of an OS X output:
#
#audio_output {
# type "osx"
# name "My OS X Device"
## device "Built-in Output" # optional
## channel_map "-1,-1,0,1" # optional
#}
#
## Example "pipe" output:
#
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
#}
#
## An example of a null output (for no audio output):
#
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
#}
#
###############################################################################
# Normalization automatic volume adjustments ##################################
#
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album", "track" or "auto". "auto" is a special mode that
# chooses between "track" and "album" depending on the current state of
# random playback. If random playback is enabled then "track" mode is used.
# See <https://wiki.hydrogenaud.io/index.php?title=Replaygain> for
# more details about ReplayGain.
# This setting is off by default.
#
#replaygain "album"
#
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#
#replaygain_preamp "0"
#
# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
# By default this setting is disabled.
#
#replaygain_missing_preamp "0"
#
# This setting enables or disables ReplayGain limiting.
# MPD calculates actual amplification based on the ReplayGain tags
# and replaygain_preamp / replaygain_missing_preamp setting.
# If replaygain_limit is enabled MPD will never amplify audio signal
# above its original level. If replaygain_limit is disabled such amplification
# might occur. By default this setting is enabled.
#
#replaygain_limit "yes"
#
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#
#volume_normalization "no"
#
###############################################################################
# Character Encoding ##########################################################
#
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
#
#filesystem_charset "UTF-8"
#
###############################################################################

2
mpv/mpv.conf Normal file
View File

@@ -0,0 +1,2 @@
keep-open
loop-playlist=inf

551
ncmpcpp/bindings Normal file
View File

@@ -0,0 +1,551 @@
##############################################################
## This is the example bindings file. Copy it to ##
## $XDG_CONFIG_HOME/ncmpcpp/bindings or ~/.ncmpcpp/bindings ##
## and set up your preferences. ##
##############################################################
##
##### General rules #####
##
## 1) Because each action has runtime checks whether it's
## ok to run it, a few actions can be bound to one key.
## Actions will be bound in order given in configuration
## file. When a key is pressed, first action in order
## will test itself whether it's possible to run it. If
## test succeeds, action is executed and other actions
## bound to this key are ignored. If it doesn't, next
## action in order tests itself etc.
##
## 2) It's possible to bind more that one action at once
## to a key. It can be done using the following syntax:
##
## def_key "key"
## action1
## action2
## ...
##
## This creates a chain of actions. When such chain is
## executed, each action in chain is run until the end of
## chain is reached or one of its actions fails to execute
## due to its requirements not being met. If multiple actions
## and/or chains are bound to the same key, they will be
## consecutively run until one of them gets fully executed.
##
## 3) When ncmpcpp starts, bindings configuration file is
## parsed and then ncmpcpp provides "missing pieces"
## of default keybindings. If you want to disable some
## bindings, there is a special action called 'dummy'
## for that purpose. Eg. if you want to disable ability
## to crop playlists, you need to put the following
## into configuration file:
##
## def_key "C"
## dummy
##
## After that ncmpcpp will not bind any default action
## to this key.
##
## 4) To let you write simple macros, the following special
## actions are provided:
##
## - push_character "character" - pushes given special
## character into input queue, so it will be immediately
## picked by ncmpcpp upon next call to readKey function.
## Accepted values: mouse, up, down, page_up, page_down,
## home, end, space, enter, insert, delete, left, right,
## tab, ctrl-a, ctrl-b, ..., ctrl-z, ctrl-[, ctrl-\\,
## ctrl-], ctrl-^, ctrl-_, f1, f2, ..., f12, backspace.
## In addition, most of these names can be prefixed with
## alt-/ctrl-/shift- to be recognized with the appropriate
## modifier key(s).
##
## - push_characters "string" - pushes given string into
## input queue.
##
## - require_runnable "action" - checks whether given action
## is runnable and fails if it isn't. This is especially
## useful when mixed with previous two functions. Consider
## the following macro definition:
##
## def_key "key"
## push_characters "custom_filter"
## apply_filter
##
## If apply_filter can't be currently run, we end up with
## sequence of characters in input queue which will be
## treated just as we typed them. This may lead to unexpected
## results (in this case 'c' will most likely clear current
## playlist, 'u' will trigger database update, 's' will stop
## playback etc.). To prevent such thing from happening, we
## need to change above definition to this one:
##
## def_key "key"
## require_runnable "apply_filter"
## push_characters "custom_filter"
## apply_filter
##
## Here, first we test whether apply_filter can be actually run
## before we stuff characters into input queue, so if condition
## is not met, whole chain is aborted and we're fine.
##
## - require_screen "screen" - checks whether given screen is
## currently active. accepted values: browser, clock, help,
## media_library, outputs, playlist, playlist_editor,
## search_engine, tag_editor, visualizer, last_fm, lyrics,
## selected_items_adder, server_info, song_info,
## sort_playlist_dialog, tiny_tag_editor.
##
## - run_external_command "command" - runs given command using
## system() function.
##
## - run_external_console_command "command" - runs given console
## command using system() function.
##
##
## 5) In addition to binding to a key, you can also bind actions
## or chains of actions to a command. If it comes to commands,
## syntax is very similar to defining keys. Here goes example
## definition of a command:
##
## def_command "quit" [deferred]
## stop
## quit
##
## If you execute the above command (which can be done by
## invoking action execute_command, typing 'quit' and pressing
## enter), ncmpcpp will stop the player and then quit. Note the
## presence of word 'deferred' enclosed in square brackets. It
## tells ncmpcpp to wait for confirmation (ie. pressing enter)
## after you typed quit. Instead of 'deferred', 'immediate'
## could be used. Then ncmpcpp will not wait for confirmation
## (enter) and will execute the command the moment it sees it.
##
## Note: while command chains are executed, internal environment
## update (which includes current window refresh and mpd status
## update) is not performed for performance reasons. However, it
## may be desirable to do so in some situration. Therefore it's
## possible to invoke by hand by performing 'update enviroment'
## action.
##
## Note: There is a difference between:
##
## def_key "key"
## action1
##
## def_key "key"
## action2
##
## and
##
## def_key "key"
## action1
## action2
##
## First one binds two single actions to the same key whilst
## second one defines a chain of actions. The behavior of
## these two is different and is described in (1) and (2).
##
## Note: Function def_key accepts non-ascii characters.
##
##### List of unbound actions #####
##
## The following actions are not bound to any key/command:
##
## - set_volume
## - load
##
#
#def_key "mouse"
# mouse_event
#
def_key "k"
scroll_up
def_key "shift-k"
select_item
scroll_up
def_key "j"
scroll_down
def_key "shift-j"
select_item
scroll_down
#
#def_key "["
# scroll_up_album
#
#def_key "]"
# scroll_down_album
#
#def_key "{"
# scroll_up_artist
#
#def_key "}"
# scroll_down_artist
#
#def_key "page_up"
# page_up
#
def_key "D"
page_down
#def_key "home"
# move_home
#
#def_key "end"
# move_end
#
#def_key "insert"
# select_item
#
#def_key "enter"
# enter_directory
#
#def_key "enter"
# toggle_output
#
#def_key "enter"
# run_action
#
#def_key "enter"
# play_item
#
#def_key "space"
# add_item_to_playlist
#
#def_key "space"
# toggle_lyrics_update_on_song_change
#
#def_key "space"
# toggle_visualization_type
#
#def_key "delete"
# delete_playlist_items
#
#def_key "delete"
# delete_browser_items
#
#def_key "delete"
# delete_stored_playlist
#
#def_key "right"
# next_column
#
#def_key "right"
# slave_screen
#
#def_key "right"
# volume_up
#
#def_key "+"
# volume_up
#
#def_key "left"
# previous_column
#
#def_key "left"
# master_screen
#
#def_key "left"
# volume_down
#
#def_key "-"
# volume_down
#
#def_key ":"
# execute_command
#
#def_key "tab"
# next_screen
#
#def_key "shift-tab"
# previous_screen
#
#def_key "f1"
# show_help
#
#def_key "1"
# show_playlist
#
#def_key "2"
# show_browser
#
#def_key "2"
# change_browse_mode
#
#def_key "3"
# show_search_engine
#
#def_key "3"
# reset_search_engine
#
#def_key "4"
# show_media_library
#
#def_key "4"
# toggle_media_library_columns_mode
#
#def_key "5"
# show_playlist_editor
#
#def_key "6"
# show_tag_editor
#
#def_key "7"
# show_outputs
#
#def_key "8"
# show_visualizer
#
#def_key "="
# show_clock
#
#def_key "@"
# show_server_info
#
#def_key "s"
# stop
#
#def_key "p"
# pause
#
#def_key ">"
# next
#
#def_key "<"
# previous
#
#def_key "ctrl-h"
# jump_to_parent_directory
#
#def_key "ctrl-h"
# replay_song
#
#def_key "backspace"
# jump_to_parent_directory
#
#def_key "backspace"
# replay_song
#
#def_key "backspace"
# play
#
#def_key "f"
# seek_forward
#
#def_key "b"
# seek_backward
#
#def_key "r"
# toggle_repeat
#
#def_key "z"
# toggle_random
#
#def_key "y"
# save_tag_changes
#
#def_key "y"
# start_searching
#
#def_key "y"
# toggle_single
#
#def_key "R"
# toggle_consume
#
#def_key "Y"
# toggle_replay_gain_mode
#
#def_key "T"
# toggle_add_mode
#
#def_key "|"
# toggle_mouse
#
#def_key "#"
# toggle_bitrate_visibility
#
#def_key "Z"
# shuffle
#
#def_key "x"
# toggle_crossfade
#
#def_key "X"
# set_crossfade
#
#def_key "u"
# update_database
#
#def_key "ctrl-s"
# sort_playlist
#
#def_key "ctrl-s"
# toggle_browser_sort_mode
#
#def_key "ctrl-s"
# toggle_media_library_sort_mode
#
#def_key "ctrl-r"
# reverse_playlist
#
#def_key "ctrl-f"
# apply_filter
#
#def_key "ctrl-_"
# select_found_items
#
#def_key "/"
# find
#
#def_key "/"
# find_item_forward
#
#def_key "?"
# find
#
#def_key "?"
# find_item_backward
#
#def_key "."
# next_found_item
#
#def_key ","
# previous_found_item
#
#def_key "w"
# toggle_find_mode
#
#def_key "e"
# edit_song
#
#def_key "e"
# edit_library_tag
#
#def_key "e"
# edit_library_album
#
#def_key "e"
# edit_directory_name
#
#def_key "e"
# edit_playlist_name
#
#def_key "e"
# edit_lyrics
#
#def_key "i"
# show_song_info
#
#def_key "I"
# show_artist_info
#
#def_key "g"
# jump_to_position_in_song
#
#def_key "l"
# show_lyrics
#
#def_key "ctrl-v"
# select_range
#
#def_key "v"
# reverse_selection
#
#def_key "V"
# remove_selection
#
#def_key "B"
# select_album
#
#def_key "a"
# add_selected_items
#
#def_key "c"
# clear_playlist
#
#def_key "c"
# clear_main_playlist
#
#def_key "C"
# crop_playlist
#
#def_key "C"
# crop_main_playlist
#
#def_key "m"
# move_sort_order_up
#
#def_key "m"
# move_selected_items_up
#
#def_key "n"
# move_sort_order_down
#
#def_key "n"
# move_selected_items_down
#
#def_key "M"
# move_selected_items_to
#
#def_key "A"
# add
#
#def_key "S"
# save_playlist
#
#def_key "o"
# jump_to_playing_song
#
def_key "G"
page_up
#def_key "G"
# jump_to_playlist_editor
#
#def_key "~"
# jump_to_media_library
#
#def_key "E"
# jump_to_tag_editor
#
#def_key "U"
# toggle_playing_song_centering
#
#def_key "P"
# toggle_display_mode
#
#def_key "\\"
# toggle_interface
#
#def_key "!"
# toggle_separators_between_albums
#
#def_key "L"
# toggle_lyrics_fetcher
#
#def_key "F"
# fetch_lyrics_in_background
#
#def_key "alt-l"
# toggle_fetching_lyrics_in_background
#
#def_key "ctrl-l"
# toggle_screen_lock
#
#def_key "`"
# toggle_library_tag_type
#
#def_key "`"
# refetch_lyrics
#
#def_key "`"
# add_random_items
#
#def_key "ctrl-p"
# set_selected_items_priority
#
#def_key "q"
# quit
#

599
ncmpcpp/config Normal file
View File

@@ -0,0 +1,599 @@
##############################################################
## This is an example configuration file. Copy it to ##
## $XDG_CONFIG_HOME/ncmpcpp/config or $HOME/.ncmpcpp/config ##
## and set up your preferences. ##
##############################################################
#
##### directories ######
##
## Directory for storing ncmpcpp related files. Changing it is useful if you
## want to store everything somewhere else and provide command line setting for
## alternative location to config file which defines that while launching
## ncmpcpp.
##
#
#ncmpcpp_directory = ~/.config/ncmpcpp
#
##
## Directory for storing downloaded lyrics. It defaults to ~/.lyrics since other
## MPD clients (eg. ncmpc) also use that location.
##
#
#lyrics_directory = ~/.lyrics
#
##### connection settings #####
#
mpd_host = localhost
mpd_password = kapuchinamusica
#
#mpd_port = 6600
#
#mpd_connection_timeout = 5
#
## Needed for tag editor and file operations to work.
##
#mpd_music_dir = ~/music
#
mpd_crossfade_time = 15
#
# Exclude pattern for random song action
# http://www.boost.org/doc/libs/1_46_1/libs/regex/doc/html/boost_regex/syntax/perl_syntax.html
#random_exclude_pattern = "^(temp|midi_songs).*"
#
##### music visualizer #####
##
## In order to make music visualizer work with MPD you need to use the fifo
## output. Its format parameter has to be set to 44100:16:1 for mono
## visualization or 44100:16:2 for stereo visualization. As an example here is
## the relevant section for mpd.conf:
##
## audio_output {
## type "fifo"
## name "Visualizer feed"
## path "/tmp/mpd.fifo"
## format "44100:16:2"
## }
##
## If the visualization on occasion diverges from the audio output, please set
## 'buffer_time' parameter of your audio output in mpd.conf to '100000' (100ms)
## or less to prevent that from happening.
##
## Note: If you're using Mopidy, an address of a udpsink gstreamer's output is
## also accepted. For example, the following section in mopidy.conf:
##
## [audio]
## output = tee name=t ! queue ! autoaudiosink t.
## ! queue ! audio/x-raw,rate=44100,channels=2,format=S16LE
## ! udpsink host=localhost port=5555
##
## will make localhost:5555 available as a source of data for the stereo
## visualizer.
##
#
#visualizer_data_source = /tmp/mpd.fifo
#
##
## Note: Below parameter is needed for ncmpcpp to determine which output
## provides data for visualizer and reset it at the beginning of visualization
## to synchronize with audio.
##
#
#visualizer_output_name = Visualizer feed
#
##
## If you set format to 44100:16:2, make it 'yes'.
##
#visualizer_in_stereo = yes
#
##
## Note: set below to >=10 only if you have synchronization issues with
## visualization and audio.
##
#
#visualizer_sync_interval = 0
#
##
## Note: To enable spectrum frequency visualization you need to compile ncmpcpp
## with fftw3 support.
##
#
## Available values: spectrum, wave, wave_filled, ellipse.
##
#visualizer_type = spectrum
#
visualizer_fps = 30
#
visualizer_autoscale = no
#
#visualizer_look = ●▮
#
#visualizer_color = blue, cyan, green, yellow, magenta, red
#
## Alternative subset of 256 colors for terminals that support it.
##
#visualizer_color = 47, 83, 119, 155, 191, 227, 221, 215, 209, 203, 197, 161
#
##
## Note: The next few visualization options apply to the spectrum visualizer.
##
#
## Use unicode block characters for a smoother, more continuous look.
## This will override the visualizer_look option. With transparent terminals
## and visualizer_in_stereo set, artifacts may be visible on the bottom half of
## the visualization.
#
#visualizer_spectrum_smooth_look = yes
#
## A value between 1 and 5 inclusive. Specifying a larger value makes the
## visualizer look at a larger slice of time, which results in less jumpy
## visualizer output.
#
#visualizer_spectrum_dft_size = 2
#
#visualizer_spectrum_gain = 10
#
## Left-most frequency of visualizer in Hz, must be less than HZ MAX
#
#visualizer_spectrum_hz_min = 20
#
## Right-most frequency of visualizer in Hz, must be greater than HZ MIN
#
#visualizer_spectrum_hz_max = 20000
#
##### system encoding #####
##
## ncmpcpp should detect your charset encoding but if it failed to do so, you
## can specify charset encoding you are using here.
##
## Note: You can see whether your ncmpcpp build supports charset detection by
## checking output of `ncmpcpp --version`.
##
## Note: Since MPD uses UTF-8 by default, setting this option makes sense only
## if your encoding is different.
##
#
#system_encoding = ""
#
##### delays #####
#
## Time of inactivity (in seconds) after playlist highlighting will be disabled
## (0 = always on).
##
#playlist_disable_highlight_delay = 5
#
## Defines how long messages are supposed to be visible.
##
#message_delay_time = 5
#
##### song format #####
##
## For a song format you can use:
##
## %l - length
## %f - filename
## %D - directory
## %a - artist
## %A - album artist
## %t - title
## %b - album
## %y - date
## %n - track number (01/12 -> 01)
## %N - full track info (01/12 -> 01/12)
## %g - genre
## %c - composer
## %p - performer
## %d - disc
## %C - comment
## %P - priority
## $R - begin right alignment
##
## If you want to make sure that a part of the format is displayed only when
## certain tags are present, you can archieve it by grouping them with brackets,
## e.g. '{%a - %t}' will be evaluated to 'ARTIST - TITLE' if both tags are
## present or '' otherwise. It is also possible to define a list of
## alternatives by providing several groups and separating them with '|',
## e.g. '{%t}|{%f}' will be evaluated to 'TITLE' or 'FILENAME' if the former is
## not present.
##
## Note: If you want to set limit on maximal length of a tag, just put the
## appropriate number between % and character that defines tag type, e.g. to
## make album take max. 20 terminal cells, use '%20b'.
##
## In addition, formats support markers used for text attributes. They are
## followed by character '$'. After that you can put:
##
## - 0 - default window color (discards all other colors)
## - 1 - black
## - 2 - red
## - 3 - green
## - 4 - yellow
## - 5 - blue
## - 6 - magenta
## - 7 - cyan
## - 8 - white
## - 9 - end of current color
## - b - bold text
## - u - underline text
## - r - reverse colors
## - a - use alternative character set
##
## If you don't want to use a non-color attribute anymore, just put it again,
## but this time insert character '/' between '$' and attribute character,
## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename with
## reversed colors.
##
## If you want to use 256 colors and/or background colors in formats (the naming
## scheme is described below in section about color definitions), it can be done
## with the syntax $(COLOR), e.g. to set the artist tag to one of the
## non-standard colors and make it have yellow background, you need to write
## $(197_yellow)%a$(end). Note that for standard colors this is interchangable
## with attributes listed above.
##
## Note: colors can be nested.
##
#
#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3%l$9}
#
#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
#
#song_library_format = {%n - }{%t}|{%f}
#
#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
#
#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
#
#current_item_prefix = $(yellow)$r
#
#current_item_suffix = $/r$(end)
#
#current_item_inactive_column_prefix = $(white)$r
#
#current_item_inactive_column_suffix = $/r$(end)
#
#now_playing_prefix = $b
#
#now_playing_suffix = $/b
#
#browser_playlist_prefix = "$2playlist$9 "
#
#selected_item_prefix = $6
#
#selected_item_suffix = $9
#
#modified_item_prefix = $3> $9
#
##
## Note: attributes are not supported for the following variables.
##
#song_window_title_format = {%a - }{%t}|{%f}
##
## Note: Below variables are used for sorting songs in browser. The sort mode
## determines how songs are sorted, and can be used in combination with a sort
## format to specify a custom sorting format. Available values for
## browser_sort_mode are "type", "name", "mtime", "format" and "none".
##
#
#browser_sort_mode = type
#
#browser_sort_format = {%a - }{%t}|{%f} {%l}
#
##### columns settings #####
##
## syntax of song columns list format is "column column etc."
##
## - syntax for each column is:
##
## (width of the column)[color of the column]{displayed tag}
##
## Note: Width is by default in %, if you want a column to have fixed size, add
## 'f' after the value, e.g. (10)[white]{a} will be the column that take 10% of
## screen (so the real width will depend on actual screen size), whereas
## (10f)[white]{a} will take 10 terminal cells, no matter how wide the screen
## is.
##
## - color is optional (if you want the default one, leave the field empty).
##
## Note: You can give a column additional attributes by putting appropriate
## character after displayed tag character. Available attributes are:
##
## - r - column will be right aligned
## - E - if tag is empty, empty tag marker won't be displayed
##
## You can also:
##
## - give a column custom name by putting it after attributes, separated with
## character ':', e.g. {lr:Length} gives you right aligned column of lengths
## named "Length".
##
## - define sequence of tags, that have to be displayed in case predecessor is
## empty in a way similar to the one in classic song format, i.e. using '|'
## character, e.g. {a|c|p:Owner} creates column named "Owner" that tries to
## display artist tag and then composer and performer if previous ones are not
## available.
##
#
#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
#
##### various settings #####
#
##
## Note: Custom command that will be executed each time song changes. Useful for
## notifications etc.
##
#execute_on_song_change = ""
#
##
## Note: Custom command that will be executed each time player state
## changes. The environment variable MPD_PLAYER_STATE is set to the current
## state (either unknown, play, pause, or stop) for its duration.
##
#
#execute_on_player_state_change = ""
#
#playlist_show_mpd_host = no
#
#playlist_show_remaining_time = no
#
#playlist_shorten_total_times = no
#
#playlist_separate_albums = no
#
##
## Note: Possible display modes: classic, columns.
##
#playlist_display_mode = columns
#
#browser_display_mode = classic
#
#search_engine_display_mode = classic
#
#playlist_editor_display_mode = classic
#
#discard_colors_if_item_is_selected = yes
#
#show_duplicate_tags = yes
#
#incremental_seeking = yes
#
seek_time = 5
#
volume_change_step = 5
#
#autocenter_mode = no
#
#centered_cursor = no
#
##
## Note: You can specify third character which will be used to build 'empty'
## part of progressbar.
##
#progressbar_look = =>
#
## Available values: database, playlist.
##
#default_place_to_search_in = database
#
## Available values: classic, alternative.
##
user_interface = classic
#
#data_fetching_delay = yes
#
## Available values: artist, album_artist, date, genre, composer, performer.
##
#media_library_primary_tag = artist
#
#media_library_albums_split_by_date = yes
#
#media_library_hide_album_dates = no
#
## Available values: wrapped, normal.
##
#default_find_mode = wrapped
#
#default_tag_editor_pattern = %n - %t
#
#header_visibility = yes
#
#statusbar_visibility = yes
#
## Show the "Connected to ..." message on startup
#connected_message_on_startup = yes
#
#titles_visibility = yes
#
#header_text_scrolling = yes
#
#cyclic_scrolling = no
#
#lyrics_fetchers = azlyrics, genius, musixmatch, sing365, metrolyrics, justsomelyrics, jahlyrics, plyrics, tekstowo, zeneszoveg, internet
#
#follow_now_playing_lyrics = no
#
#fetch_lyrics_for_current_song_in_background = no
#
#store_lyrics_in_song_dir = no
#
#generate_win32_compatible_filenames = yes
#
#allow_for_physical_item_deletion = no
#
##
## Note: If you set this variable, ncmpcpp will try to get info from last.fm in
## language you set and if it fails, it will fall back to english. Otherwise it
## will use english the first time.
##
## Note: Language has to be expressed as an ISO 639 alpha-2 code.
##
#lastfm_preferred_language = en
#
#space_add_mode = add_remove
#
#show_hidden_files_in_local_browser = no
#
##
## How shall screen switcher work?
##
## - "previous" - switch between the current and previous screen.
## - "screen1,...,screenN" - switch between given sequence of screens.
##
## Screens available for use: help, playlist, browser, search_engine,
## media_library, playlist_editor, tag_editor, outputs, visualizer, clock,
## lyrics, last_fm.
##
#screen_switcher_mode = playlist, browser
#
##
## Note: You can define startup screen by choosing screen from the list above.
##
#startup_screen = playlist
#
##
## Note: You can define startup slave screen by choosing screen from the list
## above or an empty value for no slave screen.
##
#startup_slave_screen = ""
#
#startup_slave_screen_focus = no
#
##
## Default width of locked screen (in %). Acceptable values are from 20 to 80.
##
#
#locked_screen_width_part = 50
#
#ask_for_locked_screen_width_part = yes
#
#jump_to_now_playing_song_at_start = yes
#
#ask_before_clearing_playlists = yes
#
clock_display_seconds = no
#
#display_volume_level = yes
#
#display_bitrate = no
#
display_remaining_time = no
#
## Available values: none, basic, extended, perl.
##
#regular_expressions = perl
#
##
## Note: if below is enabled, ncmpcpp will ignore leading "The" word while
## sorting items in browser, tags in media library, etc.
##
#ignore_leading_the = no
#
##
## Note: if below is enabled, ncmpcpp will ignore diacritics while searching and
## filtering lists. This takes an effect only if boost was compiled with ICU
## support.
##
#ignore_diacritics = no
#
#block_search_constraints_change_if_items_found = yes
#
#mouse_support = yes
#
#mouse_list_scroll_whole_page = no
#
#lines_scrolled = 5
#
#empty_tag_marker = <empty>
#
#tags_separator = " | "
#
#tag_editor_extended_numeration = no
#
#media_library_sort_by_mtime = no
#
#enable_window_title = yes
#
##
## Note: You can choose default search mode for search engine. Available modes
## are:
##
## - 1 - use mpd built-in searching (no regexes, pattern matching)
##
## - 2 - use ncmpcpp searching (pattern matching with support for regexes, but
## if your mpd is on a remote machine, downloading big database to process
## it can take a while
##
## - 3 - match only exact values (this mode uses mpd function for searching in
## database and local one for searching in current playlist)
##
#
#search_engine_default_search_mode = 1
#
external_editor = nvim
#
## Note: set to yes if external editor is a console application.
##
#use_console_editor = yes
#
##### colors definitions #####
##
## It is possible to set a background color by setting a color value
## "<foreground>_<background>", e.g. red_black will set foregound color to red
## and background color to black.
##
## In addition, for terminals that support 256 colors it is possible to set one
## of them by using a number in range [1, 256] instead of color name,
## e.g. numerical value corresponding to red_black is 2_1. To find out if the
## terminal supports 256 colors, run ncmpcpp and check out the bottom of the
## help screen for list of available colors and their numerical values.
##
## What is more, there are two special values for the background color:
## "transparent" and "current". The first one explicitly sets the background to
## be transparent, while the second one allows you to preserve current
## background color and change only the foreground one. It's used implicitly
## when background color is not specified.
##
## Moreover, it is possible to attach format information to selected color
## variables by appending to their end a colon followed by one or more format
## flags, e.g. black:b or red:ur. The following variables support this syntax:
## visualizer_color, color1, color2, empty_tag_color, volume_color,
## state_line_color, state_flags_color, progressbar_color,
## progressbar_elapsed_color, player_state_color, statusbar_time_color,
## alternative_ui_separator_color.
##
## Note: due to technical limitations of older ncurses version, if 256 colors
## are used there is a possibility that you'll be able to use only colors with
## transparent background.
#
#colors_enabled = yes
#
#empty_tag_color = cyan
#
#header_window_color = default
#
#volume_color = default
#
#state_line_color = default
#
#state_flags_color = default:b
#
#main_window_color = yellow
#
#color1 = white
#
#color2 = green
#
#progressbar_color = black:b
#
#progressbar_elapsed_color = green:b
#
#statusbar_color = default
#
#statusbar_time_color = default:b
#
#player_state_color = default:b
#
#alternative_ui_separator_color = black:b
#
#window_border_color = green
#
#active_window_border = red
#

1
ncmpcpp/error.log Normal file
View File

@@ -0,0 +1 @@
TagLib: ID3v2::Tag::read() - Duplicate ID3v2 tags found.

0
ncmpcpp/patterns.list Normal file
View File

4
nitrogen/bg-saved.cfg Normal file
View File

@@ -0,0 +1,4 @@
[xin_-1]
file=/home/greg/Pictures/Wallpapers/blue_rainy_leaves.jpg
mode=4
bgcolor=#000000

12
nitrogen/nitrogen.cfg Normal file
View File

@@ -0,0 +1,12 @@
[geometry]
posx=39
posy=64
sizex=1836
sizey=973
[nitrogen]
view=icon
recurse=true
sort=rtime
icon_caps=false
dirs=/home/greg/Pictures/Wallpapers;

16
nvim/lua/chadrc.lua Normal file
View File

@@ -0,0 +1,16 @@
-- This file needs to have same structure as nvconfig.lua
-- https://github.com/NvChad/ui/blob/v2.5/lua/nvconfig.lua
---@type ChadrcConfig
local M = {}
M.base46 = {
theme = "nord",
--
-- -- hl_override = {
-- -- Comment = { italic = true },
-- -- ["@comment"] = { italic = true },
-- -- },
}
return M

19
nvim/lua/configs/cmpconfig.lua Normal file
View File

@@ -0,0 +1,19 @@
local cmp = require "cmp"
local compare = cmp.config.compare
cmp.setup {
sources = {
{ name = "jupynium", priority = 1000 }, -- consider higher priority than LSP
{ name = "nvim_lsp", priority = 100 },
-- ...
},
sorting = {
priority_weight = 1.0,
comparators = {
compare.score, -- Jupyter kernel completion shows prior to LSP
compare.recently_used,
compare.locality,
-- ...
},
},
}

15
nvim/lua/configs/conform.lua Normal file
View File

@@ -0,0 +1,15 @@
local options = {
formatters_by_ft = {
lua = { "stylua" },
-- css = { "prettier" },
-- html = { "prettier" },
},
-- format_on_save = {
-- -- These options will be passed to conform.format()
-- timeout_ms = 500,
-- lsp_fallback = true,
-- },
}
return options

47
nvim/lua/configs/lazy.lua Normal file
View File

@@ -0,0 +1,47 @@
return {
defaults = { lazy = true },
install = { colorscheme = { "nvchad" } },
ui = {
icons = {
ft = "",
lazy = "󰂠 ",
loaded = "",
not_loaded = "",
},
},
performance = {
rtp = {
disabled_plugins = {
"2html_plugin",
"tohtml",
"getscript",
"getscriptPlugin",
"gzip",
"logipat",
"netrw",
"netrwPlugin",
"netrwSettings",
"netrwFileHandlers",
"matchit",
"tar",
"tarPlugin",
"rrhelper",
"spellfile_plugin",
"vimball",
"vimballPlugin",
"zip",
"zipPlugin",
"tutor",
"rplugin",
"syntax",
"synmenu",
"optwin",
"compiler",
"bugreport",
"ftplugin",
},
},
},
}

68
nvim/lua/configs/lspconfig.lua Normal file
View File

@@ -0,0 +1,68 @@
-- load defaults i.e lua_lsp
require("nvchad.configs.lspconfig").defaults()
local lspconfig = require "lspconfig"
-- EXAMPLE
local servers = {
"arduino_language_server",
"ccls", --C/C++
-- "csharp_ls",
"cssls", --CSS
"css_variables",
"dartls", --Dart
"gopls",
"html",
"marksman",
-- "pylsp",
"rust_analyzer",
"svelte",
"sqlls", --SQL
"ts_ls" --TypeScript
}
lspconfig.omnisharp.setup {
cmd = { "dotnet", "/home/greg/.local/share/nvim/mason/packages/omnisharp/libexec/OmniSharp.dll"},
}
-- lspconfig.rust_analyzer.setup {
-- settings = {
-- ['rust-analyzer'] = {
-- diagnostics = {
-- enabled = false
-- }
-- }
-- }
-- }
lspconfig.pylsp.setup {
cmd = { "/home/greg/.venv312/bin/pylsp" },
settings = {
pylsp = {
plugins = {
black = { enabled = true },
-- pylint = { enabled = true, executable = "pylint", args = { "--jobs=4" } },
pycodestyle = { enabled = false },
pylsp_mypy = { enabled = true },
}
}
}
}
local nvlsp = require "nvchad.configs.lspconfig"
-- lsps with default config
for _, lsp in ipairs(servers) do
lspconfig[lsp].setup {
on_attach = nvlsp.on_attach,
on_init = nvlsp.on_init,
capabilities = nvlsp.capabilities,
}
end
-- configuring single server, example: typescript
-- lspconfig.tsserver.setup {
-- on_attach = nvlsp.on_attach,
-- on_init = nvlsp.on_init,
-- capabilities = nvlsp.capabilities,
-- }

15
nvim/lua/configs/nvimtree.lua Normal file
View File

@@ -0,0 +1,15 @@
require("nvim-tree").setup({
sort = {
sorter = "case_sensitive",
},
view = {
width = 30,
},
renderer = {
group_empty = true,
},
filters = {
dotfiles = true,
gitignore = true,
},
})

1
nvim/lua/configs/snippets.lua Normal file
View File

@@ -0,0 +1 @@
vim.g.lua_snippets_path = vim.fn.stdpath "config" .. "/lua/lua_snippets"

Some files were not shown because too many files have changed in this diff Show More